Home » Mustang Parts » Suspension and Chassis
93mmtierod.jpg
93MMTAFront.jpg
93MMRLCA2.jpg
more

    Next Product
Adjustable Tie-Rod Ends by Maximum Motorsports
Reviews Views
0 3768
spacer
Recommended By Average Price Average Rating
No recommendations None indicated None indicated
93mmtierod.jpg


93mmtierod.jpg









Description: “Bumpsteer” is a term for the situation where the front toe changes as the suspension moves up and down. If the toe changes more than a very small amount it will cause the car to change direction, making the car unstable and unpredictable. MM offers two types of Adjustable Tie-Rod Ends. The tapered stud type can be used to make moderate changes to the geometry. It is best suited for use with a stock K-member, and does not require any modification to the spindle. The bolt-through spindle type has a much wider range of adjustment. It is required for most situations when installing a MM K-Member and requires drilling out the tapered hole in the spindle to accept a 5/8" bolt.

The installation of any adjustable tie-rod end requires that your car be measured for bumpsteer. This can be done by following our copyrighted step-by-step instructions.

For more information visit their site: www.maximummotorsports.com
SHELBY GT 350 Member
 
Posts: 5,242
Registered: April 2002
Location: Mexico City







Mustang Photos
Mustang Links    Top Sites    RSS    Link To Us    Add to Favorites    Archive    Terms of Use    Site Rules    Privacy    Contact    Sponsors    Advertise   
AllFordMustangs is not affiliated with or endorsed by Ford Motor Company. ©Copyright 2002-2011 All Auto Enthusiasts Network