This MM kit greatly improves the steering feel by reducing the amount of power assist. Steering effort is increased just enough to provide good feedback to the driver. The MM kit optimizes the pump's output pressure without reducing the output volume. Home-brewed efforts to improve steering feel by using larger pulleys or restrictor orifices can cause a sudden loss of steering assist during rapid movements of the steering wheel, a potentially dangerous situation. Because the MM pump maintains the proper output volume, the level of power assist remains constant, regardless of how rapidly the steering wheel is turned.
The pump in this MM kit requires less engine power to operate than the stock power steering pump, freeing up horsepower for quicker acceleration. It can be run at over 7,000 RPM for extended periods of time without overheating the power steering fluid. Install this kit and put an end to the problems caused by the stock pump: Over-assisted and imprecise steering, fluid spewing because of fluid overheating, and that annoying whine! The reduced pressure of this pump also reduces the likelihood of blowing out steering rack seals. Except for the serpentine belt, the MM kit includes everything needed for installation: High-performance pump, a pump mounting bracket designed specifically by MM for the Mustang 5.0 engine, a fluid reservoir, a large fluid cooler, all necessary hardware, and all hoses and fittings. Does not reuse any OEM hoses.
ST-70 - 1979-93 Mustang 5.0 (non A/C)
ST-72 - 1994-95 Mustang 5.0 (non A/C)
ST-71 - Restrictor Valve Kit Fits ST-70 & ST-72 kits
For more information visit: www.maximummotorsports.com