i had trouble with throttle stick too even with this dang angled tb spacer, the extension vap had on there for cable was rubing hood even with insulation off, it stuck a decent amount and i almost hit a gt in the rear
that would not have been fun
i'm goin to add you as a friend, i check back with you in a couple weeks to see how its coming
by the way when you do put the BBK on there it will be at least 3 times stiffer than the current one on pedal feel, i took me weeks to get use to the gt tb spring when i put this kit on there, the gt one fealt just like the V6
oh and when you do get that done could i ask you about getting me one of those brackets for the top to so i don't have to put extension on the expensive BBK tb for the cables?
BV heads, P&P lower, windstar upper, comp 218/226, 4.2 bottom end, 3k stall, flow 40's, O/R x-pipe, Pacesetter lt's, Xcal2, 65mm tb, CAI, 8.8 w/ 3.73's, MM LCA's
coming soon: blower cam and intercooled M112
dealer for Ortiz Performance; tunes, cams, etc. PM me!