Originally posted by milw96cobra
if youou lower it too much, you're gonna be putting ALOT of stress on the Ball Joints... because the pivot point of gravity on the car will be UNDER the ground... eventually you'll end up breaking the ball joints and having them pop whenever you go over a bump. It's not pretty to listen to... trust me.
If you're gonna slam your car more than 1 1/2 inches, have the Steeda X2 Ball Joints installed as well.... They are oversidezed and meant for cars when they're lowered
Also, remember to get an alignment after you lower it, because it will surely be way out of spec.
I was just about to recommend the same thing.
I wouldn't go lower than 1.5" especially if there are people you care about who will be riding with you . . .
Woe to him who builds his palace by unrighteousness,his upper rooms by injustice,making his countrymen work for nothing...Does it make you a king to have more and more cedar?Did not your father have food and drink?He did what was right and just,so all went well with him. He defended the cause of the poor and needy,and so all went well...But your eyes and your heart are set only on dishonest gain,on shedding innocent blood and on oppression and extortion. Jer 22:13, 15-17