so I dont think my car matches any of the diagrams on the service manual?
I have a 2011 built in 07/10. I have the shaker 500 with Navigation. I followed a writeup on a 2012 and he had (1) amp mouted in the driver side footwell. I looked over there and saw (2) silver boxes that looked like amps. But the plugs didnt match the diagram for early 2011. So then I checked in the trunk on the right side and I have a silver box there too, also looks like an amp. But the plugs on that don't match the diagram for the later 2011 build. So finally I turned on the car and turned the stereo on and unplugged a plug from one of the front boxes in the driver footwell. Both front 8" subs continued to work. I unplugged the larger plug on the amp in the trunk and the entire car went silent. I unplugged the smaller plug on the trunk amp and just the mids and highs cut out, leaving the door subs still going.
I'm trying to determine which wires on the large plug on the trunk amp I need to tap into to connect to my line out converter. But I'm lost. Anyone have any input???
11 Sterling Grey GT
401A, Nav, 6mt, Brembo's, 3.73's