Ford Mustang Forum - View Single Post - Shaker 500 Talk
Thread: Shaker 500 Talk
View Single Post
post #18 of (permalink) Old 01-06-2012 Thread Starter
PONY Member
emilram11's Avatar
Joined: Jun 2010
Location: Denver
Posts: 353
Originally Posted by GoT midlife CS View Post
After you remove the entire door panels and take out the stock 5x7 speakers there will be a small two wire harness connected to the stock speaker. Remove that harness and throw away the stock speaker. The metra harness will then plug in to the stock one just removed from the speaker. The other end of the harness has two connectors which will connect to the new C2. The larger plugs onto the + terminal and the smaller to the - terminal on the C2. After connecting install the c2 in the factory speaker location and then re-install the door panel. The most difficult part will be the removal of the door panel (Which honestly is just a matter of finding and removing all of the screws). You will need a torx bit, i think it's a t-30, but it's been a while. I'm sure the link explains all of that. If this is something you have never done before, follow the link provided earlier in this thread and take your time. Trying to force the door panel can be a costly mistake.
Good explanation. Thanks buddy!

DELIVERED: 2011 Mustang GT 5.0 Premium, Kona Blue, Black Leather Interior, HIDs, 3.73, Security, 19 inch Painted Aluminum Rims - Roush: Front Valance, Front/Side Splitters

Washington State 5.0 Owner's Thread:
emilram11 is offline  
For the best viewing experience please update your browser to Google Chrome