Easy sub amp install
The easiest way to add an amp is to use a line out converter that changes a speaker output to a low level line out RCAs. Just about any parts store or Walmart would have it. Use the rear speaker outputs in your rear dash to feed the signal to your amp, then you can fade to the front to lessen the subs or the other way around. Then of course the power wire, there is a rubber grommet in the firewall about the size of a quarter that is perfect. Other than that find an accessory wire under your dash, fuse box or behind the radio that shows 12v when your key is in the accessory position. Now you have signal, power and a remote for your amp.
Last edited by EdelBroke; 07-21-2012 at 03:27 PM.