Ford Mustang Forum - View Single Post - Black 5.0 emblems
View Single Post
post #2 of (permalink) Old 11-23-2012
dsargent09
Apprentice
5.0L Member
 
dsargent09's Avatar
 
Joined: Jul 2008
Location: Pasadena
Posts: 151
 
The new ones just stick on, and I found it easiest to take some fishing line and run it around every direction. It will get stuck in spots due to the little mounting prongs but when it does just start from the opposite side. The most difficult part is getting the glue off after you remove them, but its really not that bad. To get them straight what I did was i took a visa v marker and outline the original one once I had the surface all cleaned up and ready for the new ones. I did this because the original ones have a little prong as mentioned above to center and level them the new ones are just a sticker....




2013 Performance White Mustang GT 5.0 MT, 3.73s Id1000 Injectors, BAP, Paxton 2200 SL, Barton Short throw shiter + bracket, On3 o/r x pipe
(Sold)2012 Race Red Mustang GT 5.0 MT
dsargent09 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome