Ford Mustang Forum - View Single Post - 2002 v6 stereo install - not mach
View Single Post
post #1 of (permalink) Old 01-29-2013 Thread Starter
carlspeed
Apprentice
 
carlspeed's Avatar
 
Joined: Dec 2011
Location: Tampa
Posts: 54
 
2002 v6 stereo install - not mach

Guys, trying to install a stereo on a friend's '02 v6. The car is NOT the mach stereo, but it was a 6 disc. I got a wiring kit, and installed the stereo without issue. No matter what adjustments I make to the sound of the stereo, there is no bass. I know that it is not the deck because I just removed the deck from their old truck, and it was putting bass out then. In the Mustang, there were a few other wires connected to the back of the stereo. I think there were 3 connectors. The wiring kit I bought only had 1, for the main wiring. Even though the stereo is not the Mach, does it still had some sort of amplifiers that need to be activated with an additional wiring harness? I should mention, that the factory 6 disc although sucking, did put out lower response levels than the aftermarket that is installed now.

Thanks in advance. I searched, but the only thing I could find was for the Mach stereos.


Carl
Lots of F-Bodys and now...
'12 Sterling Gray 5.0 M6 w/ Brembos, 3.73 gears, Borla S-Type catback, Airaid Intake, dyno tune, and 15% tint
carlspeed is offline  
 
 
For the best viewing experience please update your browser to Google Chrome