Ford Mustang Forum - View Single Post - Cam????
Thread: Cam????
View Single Post
post #2 of (permalink) Old 12-13-2005
lcurle
GT Member
V6 Member
 
lcurle's Avatar
 
Joined: Jan 2005
Location: Earth
Posts: 1,868
 
Well, I would save up for both at the same time. Once you tear your car down to port and polish the heads, upper and lower intake, your only a few steps away from getting to the cam, and I know you do not want o tear the car back down twice when you can do it all at once. There are a few Cams out there, just remember the bigger the cam, the less vacuum you will have in your engine system, meaning brakes and other vacuum controlled items will suffer. best bet is to get a vacuum canister with a nice strong cam. I saw a .512/.512 cam for $299 from Super 6 motorsports I think.
Most places charge a core fee for a port and polish, they will send you upper and lower intake or whatever you want to get P&P and when you get them, and replace your OEM ones, you send them back and get your money back, usually $120 a piece is the core charge.


Lee
2012 V6 Ingot Silver MT
2012 V6 Grabber Blue AT
1991 Ford F150
2005 Honda Civic
----------------------------------------------
12v Guru
lcurle is offline  
 
 
For the best viewing experience please update your browser to Google Chrome