Anyone purchased or installed a 85mm MAF for a 2002 + GT? - Ford Mustang Forum
 
LinkBack Thread Tools
post #1 of 5 (permalink) Old 04-12-2003 Thread Starter
 
BigAlMo's Avatar
 
Joined: Mar 2003
Posts: 352
 
Anyone purchased or installed a 85mm MAF for a 2002 + GT?

Thinking about purchasing one but wanted to know if someone might have already tested it out or have it installed?

I have heard different stories, some say a MAF is worth it and can feel the difference and some say they couldn't tell a difference.

Can some comment on this please?




Two Pride and Joys

BigAlMo is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 04-12-2003
4.6L Member
 
blue65636563's Avatar
 
Joined: Dec 2002
Posts: 153
 
You have a p.m.

blue65636563 is offline  
post #3 of 5 (permalink) Old 04-12-2003 Thread Starter
 
BigAlMo's Avatar
 
Joined: Mar 2003
Posts: 352
 
Quote:
Originally posted by blue65636563
You have a p.m.
Sent you an e-mail..

Thanks,
Al
BigAlMo is offline  
 
post #4 of 5 (permalink) Old 04-13-2003
4.6L Member
 
CrunchMaster's Avatar
 
Joined: Dec 2002
Posts: 142
 
Hey, no fair... I want to find out about the new MAF too...
CrunchMaster is offline  
post #5 of 5 (permalink) Old 04-13-2003 Thread Starter
 
BigAlMo's Avatar
 
Joined: Mar 2003
Posts: 352
 
Quote:
Originally posted by CrunchMaster
Hey, no fair... I want to find out about the new MAF too...
Crunch, this is what C&L;s website stated.

85MM MAF SYSTEM FOR 2002+ GT MUSTANGS

In 2002, Ford completely redesigned the mass air flow unit for the Mustang. The new unit continued to measure in at 80mm but with an integrated air temperature sensor and different flow characteristics. Through dyno testing and the development of an all-new replacement MAF housing, we were able to introduce a new MAF package for 2002+ Mustang GT vehicles. Similar to our popular kits for the 1996-2001 Mustangs, our new kit #10699A comes complete with a new 85mm MAF housing, K&N air filter assembly and plastic shield to hold the assembly in place and draw cold air in from the fender.

Dyno testing has shown this package to consistently deliver an average increase of 9 HP from 3000 RPM to redline with an average torque gain of 9, and a peak horsepower gain of as much as 14 between 5500-5700 RPM. The 85mm unit used in this package can not be used with earlier model vehicles. Due to the fact that the new sensor uses a different style electronics module, larger than stock injector sizes must be accommodated through a computer upgrade in the same manner that all supercharger systems utilize for 1999 and new GT Mustangs.

http://www.cnlperformance.com/85mm_02mustang.html
BigAlMo is offline  
Sponsored Links
Advertisement
 
Closed Thread

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a VALID email address for yourself, otherwise you will not receive the necessary confirmation email needed to confirm, validate and activate your new AFM member account.

Failure to provide a VALID email address, will result in the cancellation of your new AFM member account registration.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
04 GT S/C Install...Installer won't touch my C&L 85mm MAF??? nmeofdst8 4.6L Tech 3 03-30-2005 10:44 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


Search Engine Friendly URLs by vBSEO 3.6.1