pi intake installed - Ford Mustang Forum
Like Tree2Likes
  • 1 Post By 97stangt
  • 1 Post By JonR2006
 
LinkBack Thread Tools
post #1 of 10 (permalink) Old 03-29-2016 Thread Starter
PONY Member
4.6L Member
 
97stangt's Avatar
 
Joined: Jan 2016
Location: Clarksville
Posts: 517
 
Garage
pi intake installed

so this weekend I installed my pi intake with a bunch of issues and stupidity on my part first of all the 2005 pi intake only had one coolant sensor should have gotten one with two anyway $66 later and a bunch of time spent looking for the tap and drill bit I got the intake tapped and the sensor installed then the heater hose tube I got from it was too close to the heater hose inlet so $70 later and a new tube bender it was ready to be installed come to find out that the mounting place put it on top of the transmission dipstick so found a piece of steel and drilled it to move the mounting place the original pipe was a complete pain to get out ford really doesn't want you to remove it with the engine in the car so in the time of three days I got it installed just tested it today I waited 24hs to let the rtv cure now the intake had a small crack in it by the water jacket port on the rear driver side so I will put some jb weld on it tomorrow its really just seeping and the intake makes my exhaust a little quieter and the road test it has changed my shift points around a bit normally if I tromp it won`t shift into 3rd until red line this time it was 4700 at wot but I can feel the torque increase around 3-4k its a nice boost and I can feel the increase of hp from 4k to red line thanks for the help


1997 Mustang Gt auto - White Rose - Custom 2in exhaust with headers and flowmasters and an offroad stock 2.25 in h pipe and custom bent 2.25 catback 3.08 rear end MM caster camber plates installed Kyb gr2s installed Ford racing c springs with polys isos all around SR performance upper and lower poly control arms pi head swap gt500 followers sr cold air intake hand ported stock plenum raxiom smoked halo headlights
97stangt is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 03-29-2016
BOSS Member
4.6L Member
 
JonR2006's Avatar
 
Joined: Jun 2012
Location: St. Louis
Posts: 4,990
             
Garage
Sweet man. Install sounds like it sucked but that can happen sometimes.

Glad it's on and running.


Matthew 26:52-54 / Go Pack Go!

1987 Mustang GT Hatchback - 2V Mod Swap In The Works

1997 Lincoln Town Car, PI Intake/Cams, Sofa-On-Wheels, "Fat Tony" we call it

2001 GT Convertible - D1SC / Geared / Cammed / 440wh 400wt - TOTALED 2/2019
JonR2006 is offline  
post #3 of 10 (permalink) Old 03-29-2016 Thread Starter
PONY Member
4.6L Member
 
97stangt's Avatar
 
Joined: Jan 2016
Location: Clarksville
Posts: 517
 
Garage
Thanks I love it I'm going to install the kmember and see if I can fix my ride height issue if i do I work on getting lcas if not then I will fiqure out what I'm going to do but thanks I'm glad I listened to you guys you were right best mod for the money took me a while to get the grin off my face
JonR2006 likes this.

1997 Mustang Gt auto - White Rose - Custom 2in exhaust with headers and flowmasters and an offroad stock 2.25 in h pipe and custom bent 2.25 catback 3.08 rear end MM caster camber plates installed Kyb gr2s installed Ford racing c springs with polys isos all around SR performance upper and lower poly control arms pi head swap gt500 followers sr cold air intake hand ported stock plenum raxiom smoked halo headlights
97stangt is offline  
 
post #4 of 10 (permalink) Old 03-29-2016
BOSS Member
4.6L Member
 
JonR2006's Avatar
 
Joined: Jun 2012
Location: St. Louis
Posts: 4,990
             
Garage
We may not be the smartest people on the planet but we know enough about these 2Vs to get us in trouble. Glad you listened man...

Matthew 26:52-54 / Go Pack Go!

1987 Mustang GT Hatchback - 2V Mod Swap In The Works

1997 Lincoln Town Car, PI Intake/Cams, Sofa-On-Wheels, "Fat Tony" we call it

2001 GT Convertible - D1SC / Geared / Cammed / 440wh 400wt - TOTALED 2/2019
JonR2006 is offline  
post #5 of 10 (permalink) Old 03-29-2016 Thread Starter
PONY Member
4.6L Member
 
97stangt's Avatar
 
Joined: Jan 2016
Location: Clarksville
Posts: 517
 
Garage
no problem least I have another mod instead of exhaust sound like I'm actually doing something with it but I sure you all know how it is saving for something and weighing the want to cost

1997 Mustang Gt auto - White Rose - Custom 2in exhaust with headers and flowmasters and an offroad stock 2.25 in h pipe and custom bent 2.25 catback 3.08 rear end MM caster camber plates installed Kyb gr2s installed Ford racing c springs with polys isos all around SR performance upper and lower poly control arms pi head swap gt500 followers sr cold air intake hand ported stock plenum raxiom smoked halo headlights
97stangt is offline  
post #6 of 10 (permalink) Old 03-30-2016
SHELBY GT 350 Member
Classic Member
4.6L Member
 
SoCal2V's Avatar
 
Joined: Sep 2010
Location: see user name
Posts: 8,705
               
That was one long sentence with not a comma or a period in sight dude but glad you got through it and are happy with the results.


2001 GT Convertible
/1967 Coupe
All the usual bolt-on's /200 I6, C4

And a few Explorers too... 2008 4.0 XLT 4x2, 1996 XLT 5.0 4x2, 2003 Sport Trac XLT 4.0 4x4
SoCal2V is offline  
post #7 of 10 (permalink) Old 03-30-2016 Thread Starter
PONY Member
4.6L Member
 
97stangt's Avatar
 
Joined: Jan 2016
Location: Clarksville
Posts: 517
 
Garage
thanks and sorry I was tired and just felt like typing as fast as possible I'm lucky I corrected spelling mistakes lol

1997 Mustang Gt auto - White Rose - Custom 2in exhaust with headers and flowmasters and an offroad stock 2.25 in h pipe and custom bent 2.25 catback 3.08 rear end MM caster camber plates installed Kyb gr2s installed Ford racing c springs with polys isos all around SR performance upper and lower poly control arms pi head swap gt500 followers sr cold air intake hand ported stock plenum raxiom smoked halo headlights
97stangt is offline  
post #8 of 10 (permalink) Old 03-30-2016
SHELBY GT 350 Member
Classic Member
4.6L Member
 
SoCal2V's Avatar
 
Joined: Sep 2010
Location: see user name
Posts: 8,705
               
It's all good I was just bustin your balls dude.


2001 GT Convertible
/1967 Coupe
All the usual bolt-on's /200 I6, C4

And a few Explorers too... 2008 4.0 XLT 4x2, 1996 XLT 5.0 4x2, 2003 Sport Trac XLT 4.0 4x4
SoCal2V is offline  
post #9 of 10 (permalink) Old 03-30-2016
BOSS Member
4.6L Member
 
JonR2006's Avatar
 
Joined: Jun 2012
Location: St. Louis
Posts: 4,990
             
Garage
Socal is a mean dude, OP...don't let him get away with that.
SoCal2V likes this.

Matthew 26:52-54 / Go Pack Go!

1987 Mustang GT Hatchback - 2V Mod Swap In The Works

1997 Lincoln Town Car, PI Intake/Cams, Sofa-On-Wheels, "Fat Tony" we call it

2001 GT Convertible - D1SC / Geared / Cammed / 440wh 400wt - TOTALED 2/2019
JonR2006 is offline  
post #10 of 10 (permalink) Old 03-30-2016 Thread Starter
PONY Member
4.6L Member
 
97stangt's Avatar
 
Joined: Jan 2016
Location: Clarksville
Posts: 517
 
Garage
I don't mind its been a long time since I've gotten criticized by anyone. I hate those people that cant take a joke and plus if you don't get your balls busted every once in awhile how will you learn anything.

1997 Mustang Gt auto - White Rose - Custom 2in exhaust with headers and flowmasters and an offroad stock 2.25 in h pipe and custom bent 2.25 catback 3.08 rear end MM caster camber plates installed Kyb gr2s installed Ford racing c springs with polys isos all around SR performance upper and lower poly control arms pi head swap gt500 followers sr cold air intake hand ported stock plenum raxiom smoked halo headlights
97stangt is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a VALID email address for yourself, otherwise you will not receive the necessary confirmation email needed to confirm, validate and activate your new AFM member account.

Failure to provide a VALID email address, will result in the cancellation of your new AFM member account registration.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


Search Engine Friendly URLs by vBSEO 3.6.1