Ford Mustang Forum - View Single Post - Porting Heads - Need advise on pushrods, springs, cams adjustable rockers
View Single Post
post #1 of (permalink) Old 05-23-2006 Thread Starter
MustangHarry_94
 
MustangHarry_94's Avatar
 
Joined: Apr 2006
Posts: 31
 
Question Porting Heads - Need advise on pushrods, springs, cams adjustable rockers

SO im going to keep the heads on my 3.8 and just have them ported. But im also thinking while i have the heads and intakes off i might as well throw in a cam, a set springs and some rods. ( maybe adjustable rocker arms?) So i would a cam that wouldnt break parts of my motor but still have a good high RPM range. (6000ish) What do u guys suggest for rod springs cams, and adj rockers if i even need them.

MustangHarry_94 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome