Ford Mustang Forum - View Single Post - Finished Retrofitting a Shaker 1000 in my base model Mustang!
View Single Post
post #9 of (permalink) Old 08-21-2013
Classic Member
scooper802's Avatar
Joined: Aug 2007
Location: Monterey Bay
Posts: 21
shaker 1000 upgrade from Base model audio system

I had a base model system, found a shaker 1000 system on Craigslist and did the upgrade, a shaker 500 system has 6 disc changer with 8" woofer in doors with two amps under driver kick panel and a high pass crossover signal to woofer amps, shaker 1000 system has a 6 CD changer but has a low and high pass crossover built in for additional two 10" subwoofers in trunk, I had to add wiring harness giving me opportunity of improvements, OEM wiring use 12 gauge wires to feed amps, seems too small to me, I upgraded to 10 gauge wire, I also upgraded the door and rear package tray speakers to Rockford Fosgate, I also installed Dynamat thorough entire car, There are 4 trunk amps at 125 watts each (total of 500 watts) going to two dual voice coil 10" subwoofers. The 8" woofers in door have two amps going to the 8" dual coil woofer. The tricky part is finding all the plugs, they are more expensive than what they need to be. here is the list of plugs needed (OEM NUMBERS) TBD

2007 GT500 REPLICA
1965 GT350 REPLICA
73 MACH 1
scooper802 is offline  
For the best viewing experience please update your browser to Google Chrome