Originally Posted by fastandcurious View Post
I looked at the gray output harness you mentioned on the amp. Did you just find the 2 cables that correspond to the left sub, the 2 cables for the right sub and tap into those? Or was there more to it? Any help would be greatly appreciated. Thanks!
I found the output wires from the sub amp and tapped the right and left channels. I did this over two years ago, so my memory may be sketchy. As I recall the connector has 10 pins, one side with 6 and the other with 4. The stock subs are dual voice coil so there are 2 sets of +/- going to each. pins 1 and 2 serve left side voice coil 1, pins 3 and 4 serve Right side voice coil 2, pins 5 and 6 serve right side voice coil 1, and the middle two pins on the side with 4 pins (pins 8 and 9) serve left side voice coil number 2.
You will probably be served well to get a detailed manual that has wiring diagrams.
2012 GT CS Ingot Silver Vert, Edelbrock E-force supercharger with CAI and 3.5 Pulley, Tremec T-56 Mag, Accufab 84.5, Centerforce DF, Billet Yoke aluminum driveshaft, FRPP 3.73 Rear, MRT Performance H-pipe, Bassani axle backs, JL Audio sound, Edelbrock strut tower brace, JPC adjustable UCA, UMI adjustable panhard bar, KW V3 coilovers, Steeda heavy duty front mounts, Steeda rear LCA's, 20" Steeda Spyders with Michelin Pilot Super Sports, Steeda Big Brake Kit ....... it just keeps going.