Ford Mustang Forum - View Single Post - Jacking up front end
View Single Post
post #11 of (permalink) Old 09-16-2013
TWShovel
PONY Member
4.6L Member
S197 Member
 
TWShovel's Avatar
 
Joined: Apr 2011
Location: Camino CA
Posts: 985
 
My GT is lowered, so it is driven up on two 2'x10" x 2'.5" long, with tapered ends to drive up on them and get it high enough to get my jack under it, then as others have mentioned jack the front up directly in the center of the cross member, running side to side under the engine. Stands are placed where the "K-Frame" at the widest point where they meet the body.

Rear, jacked from the center of the differential (always being careful not to place the jack any part of the jack's lift cradle on the axles stamped steel rear cover, jack it up and place the stands under the axle tubes just inside the outer axle mounts etc. Very stable...you can rock the heck out of it and get no movement...

There is no such thing as to much horespower..!!
TWShovel is offline  
 
 
For the best viewing experience please update your browser to Google Chrome