Lower control arm brackets
I've been on AMs site looking at Whitelines LCA brackets. They were recommended to me by a couple of guys but am wondering about pinion angle after installing these. Some of the feedback says it's a good mod if you've lowered your car and some say they work great with the stock length LCAs. It looks to me the only way the pinion angle wouldn't be affected would be if the hole for the control arm were located a little forward of the stock hole since it's farther from the rear axle. Has anyone here used these brackets with the stock length aftermarket tubular control arms on a stock ride height car.
2015 3.7 liter Black