Ford Mustang Forum - View Single Post - What's the hardest part of changing headers
View Single Post
post #8 of (permalink) Old 11-11-2013
Siber Express
GT Member
V6 Member
S197 Member
Siber Express's Avatar
Joined: Mar 2010
Location: East
Posts: 2,407
Originally Posted by 1slowstangguy View Post
The passenger side header is right up against the water line... Hard to get toe the front or rear two bolt without a swiveling (ball socket type)extension.... The driver side can be done in no time flat.
It was not that bad, take the 1 10mm bolt off and it moves out of the way.
The hardest part is breaking the mid pipe to exhaust manifold nuts loose, after that it is pretty easy, just takes time on the shorties to turn the nuts back on 1/3 of a turn at a time. 11 of the nuts can be reached from the top and one has to be tightened from the bottom.
2013 Performance Package V6
2013 F150 6.2L Boss
Yes it is a Boss
Siber Express is offline  
For the best viewing experience please update your browser to Google Chrome