Ford Mustang Forum - View Single Post - J&M Caster/Camber Plate question
View Single Post
post #5 of (permalink) Old 01-28-2016
HotPart
Site Sponsor
 
HotPart's Avatar
 
Joined: Jan 2005
Location: Paso Robles
Posts: 98
 
Garage
Quote:
Originally Posted by Cersei11 View Post
So I just received my J&M Caster/Camber Plates and upon inspection I noticed on the passanger side plate the notch on the top plate is aligned with the notch on the middle black plate and on the driver side plate they are opposite of each other.

Can anyone with experience installing these plates please help with the orientation in which these notches are supposed to be placed?

I know for "street settings" the black notches are supposed to face inward (towards the engine) but besides that the instructions aren't very helpful and i can't seem to find much info on the internet.

Thanks
Looks like the drivers side top plate is not installed properly. Take a photo of the bottom plate with the studs in it so we can verify you have the correct one in your kit. Either post it here or email it directly to me at [email protected]

- Sales Team -
J&M Products
www.hotpart.com
805-544-1128
[email protected]
HotPart is offline  
 
 
For the best viewing experience please update your browser to Google Chrome