Baer SS4 front and dual rear caliper help?
About a month ago I installed the ss4 front brakes from baer. Install went perfect and the rear stock brakes worked fine with the fronts.
This weekend I installed the rear SS4 dual caliper brakes. Again the install went perfect until it came time to bleed the brakes. I know I got all of the air out of the rears and there are no leaks anywere. My problem is the pedal is mushy and goes to the floor once at the floor the rear brakes do hold but just barely.
I think the problem might be the capacity of the stock master cylinder does have enough capacity do to the dual rear calipers. Or will a brake Proportioning Valve in the rear circuit fix it.