Ford Mustang Forum - View Single Post - Pre-purchase Questions..
View Single Post
post #2 of (permalink) Old 04-05-2016
GT Member
dusman59's Avatar
Joined: Oct 2010
Location: Mesa
Posts: 1,191
If you get an 2011 get one with a very late manufacturing date. Mine was built 2/4/11 which was very close to when the 12's started. I have had it back once for warranty work which was power seat motor passenger side. Transmission good and no engine tick. I would test drive whatever year I bought and run it through its paces. Problems should not be hard to find. Check for hood corrosion and recent repairs in that area. If its been repaired figure on replacing with an after market hood as corrosion will likely come back.

2011 Red Candy /build 2/1/11/ 401A
MT with Redline MTL/ Brembos/355's/glass roof
Shaker 1000/Scoops/Clear bra/Steeda UCA and PH bar
Redline hood lifts/Bilsteins with Ford Racing P springs & axle bks
UPR catch can/whiteline kdt928/MGW shifter with Epco ball
Shaftmasters DS/BMR loop & relocation brackets
Nitto 555 G2's/Steeda jack rails

Last edited by dusman59; 04-05-2016 at 05:28 PM. Reason: Added
dusman59 is offline  
For the best viewing experience please update your browser to Google Chrome