Ford Mustang Forum - View Single Post - Help- Trying to remove driveshaft
View Single Post
post #3 of (permalink) Old 11-09-2019
Jeremy Weigel
PONY Member
Jeremy Weigel's Avatar
Joined: Jan 2016
Posts: 463
I gave mine a few good whacks with a rubber mallet to break it loose from the pinion flange. Also, if you're reusing the old driveshaft, be sure you put index marks on both ends so you install in back in the same position you removed it. And I also highly recommend using a 12 point 10mm socket on the pinion flange bolts to avoid rounding the heads. I found this out the hard way.

2006 GT- Airaid Race CAI, 62mm BBK TB, SR Performance UD Pullies, FRPP Hot Rod Cams, CMDP's, Excedy Stage One Clutch and lightweight flywheel, Pacesetter Long Tube Headers with matching O/R H-Pipe & MBRP Street Axlebacks, Lito 91 Octane Tune
Jeremy Weigel is offline  
For the best viewing experience please update your browser to Google Chrome