Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 5.0L Tech
    My father and I bought an old 1988 Mustang GT as a project car for drag racing when I was 16. We started stock and made improvementss every winter which turned it into a track only car. Currently the car mods are as follows: 302 engine with .40 over bore aluminum GT40 X heads Ford B303 cam 1.7...
  2. Introduce Yourself | No Tech Questions Please!
    Hello my name is Larry I'm 43 I live in the great northwest and just purchased a 1988 Mustang GT 5.0. H.0. 5 speed ragtop in may of 2009. When I got the car this was done already; blue race wires, lowered about 2 inches, edelbrock dual exhaust from the stock headers back, after market wheels...
  3. Introduce Yourself | No Tech Questions Please!
    how is everyone doin. I have a 1988 mustang GT 5.0. i have pulled info off this site lots but now i am joining the crew. thanks for all your input thus far and i hope i can share my experiences with my car as someone else searches for help.
  4. 5.0L Tech
    ok i have an 1988 mustang gt 30 over roller rockers new pushrods speed pro pistons ford racing b303 cam. i have a bad misfire and i did a compresion test and from what i can tell it failed miserably. the bolt that holds the timing gear on the cam backed out and i bet 4 pushrods. i checked the...
  5. 5.0L Tech
    Ok so I have an 1988 mustang gt. That has a really bad misfire. And I can't figure out why. My problems all started when the bolt that holds the timing gear on the cam backed out and I bent 4 push rods. So I changed the pushrods and put new roller rockers. The car has alot of mods. I changed the...
  6. 5.0L Tech
    I have an 1988 mustang gt with lots of mods. I just put new pushrods and roller rockers in. I got it to fire but it hardly runs. With a really bad misfire Now I can't getit to start at all I've checked most vaccum lines. I replace the distributor today and plugs. I'm just so stumpped with this...
1-6 of 6 Results