Ford Mustang Forum banner

2001

  1. V6 Tech
    I been having an issue with idling, and I can't start or keep the car running without being on the gas, it will vary too, so I sometimes have to press in more or less, sounds kinda like a diesel.
  2. Mexico and Latin America
    buen dia amigos tengo un mustang gt 2001 transmision manual la cual me esta dando unos problemas cuando meto la 2da hace un chasquido muy leve necesito esperarme unos segundos y luego meter la 2da suavemente para que no truene en la tercera es muy leve la sigueinte cosa es que en la 1ra y...
  3. 4.6L Tech
    My trans (I think it's a T50) keeps popping out of second gear. I've seen posts that say to adjust the shifter stop but I don't see one on the shifter. It only pops out of second. Is there an adjustment and if so, where is it?
  4. 4.6L Talk
    hi, I have a 2003 mustang gt 5 speed, ive got a few things done to it. I have cold air intake, 70mm throttle body, 75mm plenum, Rally coil on plugs, 4.10 gear ratio, superchips tuner, and I just put on a replacement Dorman intake manifold. My problem is I have raced this other mustang (2001 I...
  5. V6 Tech
    So as i was getting out of my car today and noticed a burning smell. i popped the hood open and leaned in to inspect and the smell got stronger. no smoke, just a very strong burning smell and a lot of heat under the hood (though i was probably driving for like 30 minutes with 10 minute breaks in...
  6. 4.6L Tech
    I have a 2001 Bullitt GT with what I'm 95% sure is a bad throwout bearing. Instead of buying a whole new clutch kit like I know you're supposed to do.... I'm going to drop the transmission with the help of one of my friends and replace just the throwout bearing...the clutch was replaced before I...
  7. V6 Talk
    how much psi can my stock 3.8v6 motor take without causing real damage to my engine? what kit would you recommend? is there anything special i need for a turbo charger? sorry these are stupid questions I dont know as much about cars as id like to. any help will be appreciated thanks :yelpleased:
  8. Introductions
    I'm new to the site and also a new mustang owner. It is my first car and I want some tips on how to fix it up a bit. The engine is a V6 and has over 180,000 miles on it and I'd really like to swap it out, I just don't know what engine would be best to buy? I'm also interested in buying headers...
  9. 4.6L Tech
    I have a 2001 Mustang GT Convertible and am trying to figure out what pistons the stock 4.6L engine comes with. Forged, cast, or other?
  10. 4.6L Tech
    I'm completing the conversion of an '01 GT to a race car. Does anyone have a complete wiring schematic so I can figure out how much of the harness I can get rid of? Thank you for any help you can give.
  11. Kill Stories
    Countless times now me and my friend who owns a 2012 Hyundai Elentra with a K&N have had a few stoplight races and highway ~40mph roll races. Sadly enough he pulls away from me at the stoplights and I barely win/tie with him on the highway. Sadly disappointed with the performince of my 2001...
  12. V6 Talk
    So, after my run-in's with cheap air intakes and chips screwing up my car, I am back to stock. Now my first thought for upgrades is sound + performance. I am either thinking of buying a K&N Shortram Intake, or a Y-pipe Dual exhaust. Now I have a few questions: 1. Does K&N make intakes for 2001...
  13. V6 Talk
    Well first of all, i'd like to introduce myself, this is my first and most important forum post/question. I own a 2001 v6 mustang and I recently dropped $350 on a bama tuner and CAI..unfortunately my car ended up in the shop 2 weeks later from a faulty cold air intake that was leaking, and a...
  14. 4.6L Tech
    So i just picked up a 2001 GT for 6750. The only thing it has done to it is a saleen rear wing, flowmaster exhaust, and painted bullitt rims. Other than that its stock. This car feels very sluggish and handles very poorly compared to my 2009 v6! Although my 2008 has a bit of mods, id like to...
  15. 4.6L Tech
    hi there i just bought cams for my 01 gt i am very existed to put them in who out there has also done this and what stage did you do?
  16. SVT Cobra Tech
    Soon I plan to buy a 01 cobra. I have always loved exhaust cutouts, and as I am looking into exhaust options I see they come up very rarely. Not only do I like them because of the badassness, it creates a different sound compared to that classic mustang exhaust note everybody has. I have looked...
  17. 4.6L Tech
    Im 17, been driving a 2005 f150 fx4 that my dad gave me to drive. Im Getting like 10 miles a gallon. So im ready to buy me a GT. I found this 2001 mustang gt with mac o/r h pipe. and mac exhaust. tri ax shifter. I know a good bit about cars. my dad used to build a race fox bodys and my mom has...
  18. Audio, Video, Navigation & Alarms
    I keep looking and looking for all of these grommets that people are talking about to get my power cable through so I can finish setting up my subs. I must be retarded to not be able to figure this out but can you please post pictures?? o.O
  19. 4.6L Tech
    So I Have been debating on whether or not to shave the GT Badges off the fenders on my 2001 Bullitt once I get home. Anybody have any opinions or just straight up objections to whether I should or not? Let me know please.
  20. V6 Talk
    i have a bright yellow v6 mustang and want to make it nicer looking. i saw some BOSS stripes but they have other kind of stripes if u look around the website. after putting the BOSS stripes im thinking about tint the window. do you think the BOSS stripes will look badass? what do you guys think...
Top