Ford Mustang Forum banner

2006 v6

  1. 4.10's or 3.73's

    2005-2010 V6 Mustang Tech
    I know this has been asked A LOT but.... Ok i bought a t-lock a couple of days ago and i would've bought the gears but i'm still unsure... I have a 2006 V6 and cant decide on either the 4.10's or 3.73's! I know if i drive highway more (which i will be) i should get 3.73's but i just wanted to...
  2. Dual exhaust conversion: bumper cutout template

    2005-2010 Mustang Talk
    http://pysales.com/inst/SFM68-69-bumper-cutout02.pdf I found this Pypes bumper cutout template I just had a few questions about it. Is this for the 2006 V6 4.0L S197? This is for the driver side cutout to support the 2nd muffler correct? What are some good tools to use when doing this? I am...
  3. 1996 3.8L V6 engine swap to 2006 4.0L V6?

    V6 Tech
    can you swap out the engine from a 1996 V6 to a 2006 4.0L? will the 1996 transmission line up? i have the ECU and wiring harness. What else will i need? It is an automatic transmission
  4. Hard Starts in Cold - 93 Octane Tune

    2005-2010 V6 Mustang Tech
    Apologies in advance if this has been covered but I couldn't find anything on it. My 06 v6 stang starts really hard in the cold. The engine will start but will immediately sputter out within a couple seconds of starting. After the 2nd or 3rd try it starts right up and runs perfect. I bought...
  5. 2006 Ford Mustang V6 Speed Governor Removal

    Road Racing
    I have been researching the 2006 Ford Mustang V6 (4.0 Liter, 210 HP) and cant seem to find what im looking for. I know ive heard the Mustang V6 will be stopped at around 115 because of the governor, but does anyone know how fast the 2006 Ford Mustang V6 will do without the speed limiter? Thanks...
  6. 2006 Mustang v6 Rattle Vibration when Idling

    2005-2010 V6 Mustang Tech
    I have a 2006 v6 auto that rattles when sitting still. It seems to only do it while the car is in gear. There is an audible rattle that sounds like it is on the driver's side of the engine bay. However I can also feel the vibration in the brake pedal. It seems worse when the AC or my headlights...
  7. 2006 V6 Automatic Gear Shifter

    2005-2010 V6 Mustang Tech
    I have a 2006 V6 Automatic transmission. I just had the sylanoid replaced today. Car seemed to be doing fine until just now. The car was in park, I clicked the button and pulled it down to reverse. When I released the button, the button popped into place but the gear shifter didn't lock. I was...
  8. 2006 blower motor

    V6 Talk
    I lost speeds 1-3 but 4 still works, i heard it could be a resister. Can anyone help? Thanks!
  9. 2006 Blower Motor

    2005-2010 Mustang Talk
    I recently tried to use my blower and relized I have lost speeds 1 through 3, but 4 works. Doing research I heard it could be the resister. Anyone have any ideas and is it an easy fix? It just happened. Thanks for any help!
  10. building standard mustang on a budget, brainstorming ideas

    2005-2010 Mustang Talk
    I am trying to brainstorm easy and relatively cheap mods for my 2006 standard mustang. I am trying to think outside the box and thought what better place to come for ideas than here. I have a picture posted on my profile. Please respond with ideas. Thanks much, Penelope
  11. 2006 Mustang V6 daily driver gear question?

    2005-2010 V6 Mustang Tech
    Hey yall i know this question has been asked on here so many times it's not funny but i've been reading all the posts and i'm still confused? First a lil background that may help...I have an auto 06 v6 that has a new throttle body, spacer, and bbk cold air intake, true duals with flowmaster...
Top