Search Results for ‘390’

Hi, I saw this yesterday and I have a doubt: "A Marti Report revealed Ford built 2,932 coupes for 1967 “with these engine/transmission codes,” referring to the 390 with 4-speed. Marti’s book, “Mustang … by the Numbers (1967-1973) reveals additional breakdowns of 543 and 4,403 of the...

Hi, I am replacing the camshaft I installed about 20 years ago. I do not remember the specs or the maker. The cam has ( or had when it was new) a big lope and performed great, this is why I want to replace it with the same exact one. The markings on it are: On the face opposite the dist. gear...

Engine: 1967 Mustang S-0code 390 I rebuilt this Mustang motor a while back and finally got a starter on it to turn the engine without hand cranking. When I spun it the first time, I checked the rocker arm area (under valve convers) for new oil. I did not see any. Once I was told that by...

Hello, My 1969 mach One "S" code 390 has a ticking noise in the driver’s side valve cover, it is louder when you rev the engine and listen during the deceleration. I thought it was lifters going bad so I installed a set of Comp Cams hydraulic lifters, the noise did not go away and now it...

Hello everyone, An oppurtuinity to purchase a 390 for my 1969 coupe had come up. My coupe is a original 302 but I was wondering if I could hook the existing transmission(c-4) automatic up too the 68 390? Also is it as easy as putting in new motor mounts or will it even fit in the car? Thanks...

I just bought a 1967 Mustang Fastback S code gt390 and im wondering how much it would cost for me to rebuild it from a straight shell no rust into a daily driver car

As stated in title i have a 390 that i built up a lil bit and am having some interesting issues with it. long winded info but please read, i want to give all my info here so as to come up with quick response. the car (69 mustang coupe) accelerates a lil better than a warmed 351w and pulls...

As stated in title i have a 390 that i built up a lil bit and am having some interesting issues with it. long winded info but please read, i want to give all my info here so as to come up with quick response. the car (69 mustang coupe) accelerates a lil better than a warmed 351w and pulls...

How much do you think an old used 390 is worth?

I was told that if you have a bad exhaust leak it could blow up your engine. Is this true? As far as I knew you could pull your entire exhaust off and it would still run fine, perhaps even better.

I have a 390 FE engine. Its currently installed and runs fine...But I'm looking to build it up a little...I'm wanting to make around 400-500 hp from it..The only work it has done to it is a mild cam and a aluminum intake.. What is the best way i should go about building this thing on a budget...

First time on here, and i hope we get along:wavey i just picked up this 68 mustang 390 s code gt, luxury interior and original Highland Green Metallic, like the bullitt from the movie with steve mcqueen. it still has the original paint but needs full restoration. have the full drive train,,in...

ok guys im looking for some help i was just given a 390 with a c6 trans. i have a 91 originally a 2.3 with no trans that i found in a junk yard that was 8 years ago now the car has a 302 with and edelbrock performer package on it no computers running the car all old school under the hood. but...

I have a numbers-matching 67 FB, 289 4v, C-4 and am trying to decide if I should rebuild the existing 289 or replace it with a 390GT engine with 427 heads. I'm looking to get 350'ish HP (or more) out of an engine. If I do put in the 390 I would keep the numbers 289 (just to keep it all...

I'm looking at buying a 1967 galaxie 500. The emblem on the car says it's a 390 motor, but the owner told me that some one put a 428 in it. I know there is probably not a lot of difference between the two motors, but does anyone know of a way to tell if it really is a 428 and not a 390. Any...

Hi, just singed up and wanted to say hi! :) I'm from Trieste Italy near aviano USAF airbase. I'm looking for a mustang 1967-1969 Fastback GT 390 S code. I know what kind of model is and how much is worth...it's nearly 6 months that i'm looking for a decent piece to import from the states. My...