Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 60 Results
  1. 4.6L Tech
    I was changing the belt on my 2002 Mustang GT and had to remove the crankshaft position sensor to get the belt off. The location of the sensor does not match the factory manual or any photos or videos I've seen. Anyone know why mine might be different?
  2. 2005-2010 Mustang Talk
    So I've had this 2007 GT 4.6L just under a week and wouldn't you know it, whenever I am coming to a stop and push the clutch in the idle is back and forth. At times it will nearly die on me. I've watched plenty of youtube videos on this but everyone has a different solution. Where should I start...
  3. 4.6L Tech
    Hello everyone, I'm trying to find parts for a build I want to do this coming winter here's what I have. 99 GT 5 speed 3.55 ford racing gears 4.6L Windsor block 2.1L intercooled kenne bell supercharger K&N Boost a pump I'm looking to get a smaller pulley and get more power out of my car. It's...
  4. 4.6L Tech
    I have a 1995 mustang with a 2000 gt engine in it. Today the ground wire (the wire that grounds the negative battery cable) was coming loose and causing a big mess. It was causing the car to jump around, in the process of stalling sort of, and eventually, it cut off. Now I was able to push the...
  5. 4.6L Tech
    Hey guys, I recently got my 2000 Mustang GT (5 speed) out of storage from the winter, and I now notice a ticking noise under load most noticeably in 1st and 2nd gear above 2.5k rpm (Does not make the noise on Deceleration). The Car is near stock besides a new CAI, Muffler Delete, and Stage 2...
  6. 4.6L Talk
    There are a few CAIs on American Muscle that fit the Mach 1, each ~$275. However under the GT section there's a BBK intake for $200, or an SR Performance (AM's house brand?) for under 100. They say they are for 2V and not 4V, but does that matter with intakes? If I pull up that same BBK intake...
  7. 4.6L Tech
    Well my '96 was the first time really delving in to the 4.6L Mustangs. Stupid me didn't do the most thorough of researching when picking one out, wish I would've gone '99-04. So I'd like to push the power up on my car. Preferably a more powerful engine.. Trying to decide here what would be...
  8. 2005-2010 Mustang GT Tech
    Hey everyone. I am looking for a good forged rotating assembly for my 06 mustang gt and i am having some trouble finding the right one to go with. I am brand new to engine building so go easy on a newbie like me. Some things to consider is the engine is a 4.6L V8, 281ci, and going to receive a...
  9. 4.6L Tech
    hi my 02 mustang gt theft light keeps flashing after i turn it off. car starts up fine and i put the key in the on position and theft light stops blinking and goes away. I only have one key, i think i might have a bad chip in the key so i need a new one? if someone can help that will be great thanks
  10. 4.6L Tech
    PRI 2014: Ford Racing's New 4.6 Stroker Short Block and New Z2 Head - StangTV Just saw this on the interwebs and thought I would share. Ford racing revealed they have made a Shortblock that will bump up the displacement of our 4.6L engine to a 5.3L. These block will supposedly be able to mount...
  11. 4.6L Tech
    Looking for someone who has swapped their 4.6L Romeo heads. I need some info on brand names and good prices for either new heads or remanufactured and ported ones. Preferably ones that come with stock cams.
  12. 4.6L Tech
    So I'm having trouble with my engine starting every now and then. It only seems to do this when the engine is hot. For example, I'll go run some errands and once I've made a few stops, the engine will turn over, but take an extra 5 seconds or so to stop. In the mornings or if I haven't driven in...
  13. 4.6L Tech
    Hello everyone. I have had this ongoing noise in my car ever since they day I got it. Its about time I finally get around to fixing it. To me, it sounds like a spray paint can rattle coming from the front of the motor. I've already replaced the idler pulley and the tensioner pulley just because...
  14. Superchargers+Turbochargers
    Hello, so I just bought my 2006 mustang gt with 45000 miles. I am looking to supercharge it. I am aiming for about 400-425 hp to the rear wheels. What supercharger kit would be best for this? Would like to keep the budget at around $5000. I also want to be in the safe range for my stock 4.6 3v...
  15. 4.6L Talk
    Hi guys, I have a 2004 DSG gt and the thing is with mustang guys, we want more power! So I just wanted to know what is the best engine ( that's fits good and has power) to do a swap with??
  16. 4.6L Tech
    hello, Is swapping cheaper than actually a GT? Would I be able to keep my auto tranny for the v6 or would I have to swap for a GT auto tranny ? thanks for reading,replies will be greatly appreciated give me all the info I need to know or more! Thanks, NinjaMustang. vampire.gif
  17. Classic Tech
    Does anybody have info on this swap or links to a wright up ? I can't find any I found a million on dohc 4.6 even 5.4 but no solid info on 99-04 4.6l pi 2v mustang gt
  18. 4.6L Tech
    Has anyone had this problem? My 96 gt Bucks pretty hard in all gears and on all Tunes from my Bama Tuner. Like when you go to accelerate under load or from a dead stop, it starts Bucking pretty bad. No CEL's and the only code that's came up on my Bama tuner is P0452 a couple of times. I've...
  19. New Member Introductions | No Tech Questions
    Hi guys I just recently entered the mustang brotherhood. Bought a 98 Mustang GT Dark Satin Green. Strictly stock for the time being at least for the next couple months before I look into a cat-back system and some other minor bolt-ons.
1-19 of 60 Results