Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. 2005-2010 V6 Mustang Tech
    I have a 2010 v6 auto with 125k miles. My car has had some issues with the AC where it will short cycle and try to stall out. More recently, if I turn the car on after I let it sit for an hour and a half after driving, it will almost immediately stall out and die. There are codes for all 4 o2...
  2. 4.6L Tech
    The bearing in my ac pulley went, so I replaced it with a brand new AC clutch pulley/armature ect. Now when the ac is on, each time the ac kicks in and grabs the outside armature that spins the compressor, it slaps itself together and makes a pretty noticeable metal on metal clicking/banging...
  3. General Mustang Tech
    The bearing in my ac pulley went, so I replaced it with a brand new AC clutch pulley/armature ect. Now when the ac is on, each time the ac kicks in and grabs the outside armature that spins the compressor, it slaps itself together and makes a pretty noticeable metal on metal clicking/banging...
  4. 4.6L Tech
    Hey there yall. My AC was working fine then few days ago I turned it to Max AC and it took a lil while for the AC clutch to engage. Then got worst and I would switch off and max to start AC clutch. Now the AC clutch not engaging at all.. Checked low pressure switch added R134a By the way I...
1-4 of 4 Results
Top