Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 20 Results
  1. V6 Tech
    Hey all, have a 1998 3.8 with a A/c that wasn't blowing cold. Put the recommended 34oz of r134 in and while I was doing so I noticed the compressor finally kick on but then after about 10 seconds it starts to cycle. Now when I first start the engine with the A/C on full, after a moment the...
  2. 2015-2023 5.0 (V8) GT Tech
    So I have a CSF racing radiator, OEM AC condenser, and killer chiller Ive had my ac recharged and its still not blowing like it should? any one have this problem? solution?
  3. Classic Tech
    Hey everyone! I just had another quick question. My 1967 coupe didn't come with any air conditioning, can I install it into my car? What would I have to do, and would it be worth it? Or is there a better option? Thanks!
  4. 2011-2014 Mustang Talk
    Hi, '13 GT The A/C is blowing cold on my windshield at non defrost settings so I think it just needs to recalibrate itself. Cold air bleed onto windshield is bad in FL because the fog forms on the outside of the glass. Can I pull a relay to reset the AC system or just take it in under...
  5. Classic Tech
    I bought 1965 with a transplant 302, which was wore out , I installed a 1979 302 hvy weight crank. car came with the factory air installed , except compressor is from ?. none of the belts ran inline when I bought it, so during my eng install I put the March 1697 pulley set on. I am wanting to...
  6. 2005-2010 Mustang GT Tech
    My car is a 2005 GT with 45k miles. Turned on my A/C cruising at 50 MPH while in a bend and the car stalled out! The AC had felt warm the previous use. Started back up with AC OFF, but now there is a grinding noise in AC Compressor area. OK, What did I break? and how much is this gonna cost...
  7. 4.6L Tech
    My car is a 2005 GT with 45k miles. Turned on my A/C cruising at 50 MPH while in a bend and the car stalled out! The AC had felt warm the previous use. Started back up with AC OFF, but now there is a grinding noise in AC Compressor area. OK, What did I break? and how much is this gonna...
  8. Classic Tech
    I have a 1968 mustang with a 302 from a '73 Gran Gorino in it. It was originally an inline 6 200. I thought I had an a/c for the car, but after I got it painted the guy sold it. Not to mention, I just painted it black. So it's going to be a little warm this summer. So if any of you guys have a...
  9. 5.0L Tech
    I have a 1968 mustang with a 302 from a '73 Gran Gorino in it. It was originally an inline 6 200. I thought I had an a/c for the car, but after I got it painted the guy sold it. :banghead: Not to mention, I just painted it black. So it's going to be a little warm this summer. So if any of you...
  10. V6 Tech
    My mustang that I bought used and abused has A/c issuses, the air compressors head isn't turning when i put the a/c on, a friend told me just to put freon in it and it will work I got some freon should I be optimistic? Or what are some things I can do to rule put possible problems.
  11. 5.0L Tech
    Hi guys, I'm new to the forum and I need some help. I'm trying to delete my AC compressor and smog pump on my 1980. I found the right way to route the belt, but my tensioner is pushing my belt down and it's making it rub together on the water pump pulley. I think I just need to go just a hair...
  12. New Member Introductions | No Tech Questions
    i bought a 1966 mustang and i want to put a a/c unit in it. im 16 and im looking to get a cheap one that would work well because i was looking and the "perfect fit'' one is like 1300 from what i seen. does anyone have 1 for sale or kno where i can get 1 for cheap or fairly cheap? thanks :worship
  13. 4.6L Tech
    Hi, I'm new to the forum and was looking for some advice. I recently added refrigerant to my AC, and after doing so, I have noticed that when it idles, a strange grinding sound seems to be coming from the engine. I have done some research which leads me to believe it might be a problem with my...
  14. SVT Cobra Tech
    My 2003 cobra has been overheating for the past couple of weeks, changed the thermostat and burped it with no avail. The fan isn't working, not even when I turn the air conditioning on. I have a tester, and I'm not getting power to the fan when it warms up or when the air conditioning is on...
  15. V6 Talk
    Ok to get to the point. I think I replaced the r134 correctly...first I aired out the old stuff,replaced the new stuff and checked the pressure.ac still not working. The air blows out fine, but no cold air. I hear there is a clutch to this ac system.I went through the repair guide and I dont...
  16. Classic Tech
    great looking site and I am happy that I have located it. i have a 65 2 + 2 completely original and updated and am having an issue with the a c unit. Today, the unit seemed to release a lot of condensation into the passengers side of the car (left foot) Does anybody know of a way to correct...
  17. V6 Tech
    The blower motor in my wifes 2001 V6 went out. Replaced it with a new motor from NAPA. It worked great, all the speeds and settings worked for about a month and one day the motor burned up and filled the car with smoke. I figured it was just a defective motor and took it back and swapped it for...
  18. Classic Tech
    My 66 has the underdash air unit but i've never had A/C. I've had the car 15 years. In the engine I see the condensor,filter and hose but no A/C Compressor. what would i need to get the A/C running? how can I check if the condensor and filter work? I would hate to waste alot of money if not...
  19. V6 Tech
    The a/c on my 2001 Mustang is not blowing cold. It was working fine one minute and blowing hot the next. I took it to a mechanic. His best guess right now is that it's the CCRM. He checked controls, pressure switch, etc. (Nothing else controlled by the CCRM seems to be malfunctioning.) He...
1-19 of 20 Results
Top