Search Results for ‘amp’

Hello all, When I bought my Mustang, I wanted to install an aftermarket head unit in it and I got all of the equipment I needed based off the other thread I saw on here. The stock radio and CD player that came with the car when I bought it off a guy on CL stopped working, so I assumed that they...

I pulled my car out today to take it for a ride and when I started it the amp Guage was in the middle but when I turned on my heater it went straight to the d. Then when using my blinker it starts to flutter in between the d and middle. My stereo is also crackling really bad which it never did...

Since this is my first post I thought I would start off by saying thankyou to everyone on here because even though this is my first post, I have used these forums for quite some time and usually found all the info I've needed. So anyway now to my problem. This is my second mustang and both my...

I have a 98 V6 convertible that I have as my daily driver and I want to throw some subs into her. She has the mach 460 stereo system in and the factory door speakers I blew a while back and havent found 6X8's that will cut it for me. I was wanting to throw in two 8" subs but seeing that I have a...

I have a 1998 convertible and have been throwing around the idea of putting some subs in her. As you know with the convertibles you get less trunk space so i was hoping to avoid a box in my trunk. I was thinking about cutting holes (one on each side) underneath my back seat. I dont want to do a...

I'm putting a small amp in my mustang and ran into a wire near the emergency fuel pump shutoff, it looks like its for a CD changer or something, can I use it for the battery to amp? Posted from my iPhone

I have 2 kicker cvr 10's a box, and a kenwood 1800w amp in my garage all like brand new that i had installed in my jeep before i sold it to have sales tax money and a payment to my college so i could get credit for my internship, but anyways, i wish to install the amp and subs in my car but im...

I have a 2000 Mustang GT with the Mach 460 upgrade. But nothing from the Mach 460 is still there except for the amps. The previous owner had it wired for subs but took them out before selling it. My dad and I have lots of experience with sound systems so we know what we are doing. I have a...

Okay well im in need of some new subs and i have an amp already i just want to up grade so... Will these subwoofers Kenwood - KFC-W3013PS work with this amp Kenwood - KAC-8105D I think they should be okay i just want to double check myself and see what other people say i was going to run the...

Hey guys, I recently bought an 05 v6 convertible as a small project. I took out the driver side door panel and replaced it with the GT door panels along with lower speakers/amp. I plugged in the speaker and tested it just by turning on the radio...nothing. Looked at some fuse diagrams and...

I keep looking and looking for all of these grommets that people are talking about to get my power cable through so I can finish setting up my subs. I must be retarded to not be able to figure this out but can you please post pictures?? o.O

Hey guys, So I've asked for advice on my setup before but I just wanted to get some more opinions. Currently I have (waiting to be installed) one 12'' Alpine Type-E Single Voice and a ported box for it as well as an Alpine 150-watt amp. Will this setup be enough for the deep bass I am looking...

Ok. Thought I'd show how i'm going to install the following full Kicker system into my 2006 V6 Mustang: --2 Sets of Kicker QS65.2 Component Speakers --2 Kicker S10L7 Solo-Baric Subwoofers --Kicker ZX650.4 Amplifier --Kicker ZX1500.1 Amplifier --Kicker PKD! Multi Amp Install Kit --2 Sets of...

I have 2 Kicker 10s 4Ohm 150 RMS 300 Peak I need help on finding a cheap amp (under 150) to make these bump

I wanna add a new amp and 2 subs to my Shaker 500 without putting in a new head unit. I heard I need some type of wiring harness and a line output converter? What is needed to keep the stock head unit? Links to products would be awesome. If you could lend some help on this topic, even if it...

I have a 90 mustang convertible with the 6 speakers I replaced the front tweeters with speakers and have new speakers in the door and out back. I also have a new head unit (Pioneer mvh 8200bt) now heres the fun part the previous owner did a wiring job into some kind of wire organizers and used...

I recently replaced the deck and front door speakers in my 2004 (both Kenwood) and now the door speakers cut out if the volume gets too high. The replacement speakers are 80w and the stock system is a Mach 460. I talked to an audio tech about it and he suggested that the speakers are drawing too...

does anyone have any ideas about how to fit a nice box with two twelves in this tiny trunk ive tied 100 different boxes even single subs but my box is still yet in my back seat any help would be awesome.

So to begin with, here is the point that i am at right now. I have a Kenwood head unit installed, and two new polk speakers in the door. I have an Infinity 4 channel (111w x 4) amp that I am trying to figure out how in the world to install. I have my dash radio area taken dissassembled and the...

Hey! the title pretty much says it all, ive looked around and saw a couple people saying where to do it and such but no posts had good pictures or anything so i figured while im running my wires through i might as well take a couple pictures! REQUIRES NO DRILLING :smilie The spot i ran my...