Ford Mustang Forum banner

bbk

  1. 4.6L Tech
    I currently have SLP Loudmouth 2's on right now with stock mid pipe and manifold. I am thinking about purchasing BBK LT headers and BBK H-pipe. Does anyone have this exhaust combination or do you think this would sound good?
  2. 4.6L Tech
    Hello Mustang enthusiasts, I am going to need some expert info. I am currently swapping a coyote into my 2000 GT and need to know if the sn95 stock k-member is different from the 99-04 stock k member. I have BBK swap long tubes and according to LMR they don't clear the sn95 K-member without...
  3. V6 Tech
    I have a 1998 v6 5 speed coupe that has been hard starting lately. The first start of the day it always seems like it has to crank for 2 or 3 times longer than normal, but it always starts. if I go to the store, and come back out an hour or 2 later it starts right up. Im thinking fuel pump check...
  4. Introductions
    Hey guys. My name is Anthony. I live in Miami, FL and I just bought my first Mustang. This is also the first American car I've owned. It's a 2002 GT. It will be a little project car for me. First thing is to fix all the abuse the previous owner(s) caused. It has a vacuum leak from the rear of...
  5. 2011 - 2014 Mustang GT Tech
    Hey guys found a good deal on some chrome BBK long tube headers and short x pipes. Been looking for awhile but havent been to serious until I found this sale. I have a few questions for the members here. 1. What kind of power am I looking at after the tune, heard in the 20's rwhp is that...
  6. 2005-2010 Mustang GT Tech
    Whos running what?
  7. 2011 - 2014 Mustang GT Tech
    I recently got a fix-it ticket because my car is to loud... I currently have pypes LT headers, Pypes catted X-pipe, and Pypes pype bomb axelbacks. Which makes for a pretty loud set up. The officer told me that I just need a muffler and he would sign me off. So my question is. Are the BBK...
  8. 2011-2014 Mustang Talk
    Hi everyone! I just purchased a BBK CAI system and have I'm currently in a bidding war on Ebay for a SCT tuner as well. I'm wondering if anyone has gone with this combination? Also, does the SCT tuner have a pre-loaded config so you can just "plug n play" to the OBD or do you have to download...
  9. V6 Tech
    I installed the bbk underdrive pulleys on my 1998 v6. But, it was only the crank pulley. Whenever I mash the gas the goes and at a random combo of vehicle speed and engine speed the car stops accelerating and makes a droning sound. Does anyone have any idea what could be causing this? Any help...
  10. 2011-2014 Mustang Talk
    Hi everybody, I've been looking into buying some shorty headers for my 2012 Mustang GT. I'm debating between Kooks or BBK. I've noticed that the BBK shorty headers are cheaper but I haven't any videos on YouTube with anyone with a Mustang GT with those headers. I already know what the kooks...
  11. 2011 - 2014 V6 Mustang Tech
    So here is video and sound located near rear exhaust. Bama 87s,89P,91R BBK 73mm TB + BBK Chrome shorty headers. All at low speeds with open GoPro Case for better sound. 91R is my favorite tune so far. 87s has lots of low end. Amazingly fun tune. But looses wind in higher RPM. But my MPG dropped...
  12. 2011 - 2014 Mustang GT Tech
    I was wondering if anyone knew of any compatible shorty off road H pipes I bought the ceramic long tube headers for my '12 GT and I know that bbk makes the x-pipe but I prefer a H and just wanted to see if anyone had found one that'd work.
  13. 2005-2010 Mustang GT Tech
    I have an 2007 gt convertible with diablo tuner, msd coil packs, roush off- road muffler delete exhaust, aem cold air intake and a roush short throw shifter. Looking to add a little more hp is the bbk 62mm throttle body worth the money, will it give me the 15-20 hp like they say it will. The car...
  14. V6 Talk
    Hey guys, just want your opion in my current setup in my 2002 mustang V6 BBK shorty headers 65mm throttle body BBK cold air intake High flow catted Magnaflow X pipe MAC cat back exhaust 3.73 Gears SCT tuner.
  15. 2011 - 2014 V6 Mustang Tech
    Merged header threads>>>>>>>>>>>>>>>>>>>>>> Well been doing some reading and was curious to find out what are the differences between the current selection of LT headers out there. You got: Borla which are 1-3/4" x 2-1/4" BBK which are 1-3/4" x 2-3/4" Bassani which are ???? x 2-1/2"...
  16. 4.6L Tech
    I know that this post will probably get several replies saying that it is repetitive, but I hope you will take time to read through what I have to say. anyways I have read decent things about both the C&L plenum and BBK throttle body. but before I get to the question. let me further explain...
  17. 2005-2010 Mustang GT Tech
    I currently have a 2005 Mustang GT. Right now I believe I have a Mac Pro Chamber Mid-Pipe on my exhaust. I am about to buy the BBK Chrome Tuned Length Shorty Headers, but want to make sure that they will fit with the Mac Pro Chamber Mid-Pipe? Thanks for any help!
  18. 4.6L Talk
    Ive searched everywhere and cant really find anything on it, I had a shop install BBK shorty headers on my 2000 GT and when I got it back the headers would hit the inside of the engine compartment. They said it had nothing to do with how they installed them so it wasn't there fault. It does...
  19. 5.0L Tech
    Ive searched everywhere and cant really find anything on it, I had a shop install BBK shorty headers on my 2000 GT and when I got it back the headers would hit the inside of the engine compartment. They said it had nothing to do with how they installed them so it wasn't there fault. It does it...
  20. 2011 - 2014 V6 Mustang Tech
    I have the roush axle backs, bbk throttle body, never opened driveshaft, a sct bama tuner, and american racing tires and wheels! If interested post a reply!
Top