Ford Mustang Forum banner

belt

  1. Intermittent Chirp/Squeal from front of engine

    4.6L Tech
    I have read a lot of posts and watched a lot of videos on this but have found no solution yet. This intermittent chirp/squeak started early this year on my 2002 Mustang GT. It sometimes lasts several seconds to a minute, sometimes on/off like Morse Code, and sometimes goes away completely...
  2. fried cooling fan pigtail connector

    2005-2010 V6 Mustang Tech
    My serpentine belt was squeaking so I went to my local parts store, they sold me a 4 rib belt instead of a 5 and I didn't notice.. I didn't even get 10 miles on the new belt before I realize my rpms and dipping HARD at idle and my a/c is going from cold to hot over and over, my fans usually come...
  3. Crankshaft position sensor

    4.6L Tech
    I was changing the belt on my 2002 Mustang GT and had to remove the crankshaft position sensor to get the belt off. The location of the sensor does not match the factory manual or any photos or videos I've seen. Anyone know why mine might be different?
  4. Serpentine Belt Noise

    4.6L Tech
    Hi all, my 2000 Mustang GT 4.6 has what sounds like a bad bearing in the serpentine belt area. I replaced the top idler pulley to the left of the alternator as well as the belt tensioner. I am still hearing the noise, it sounds like it's coming from the middle of that area. I'm thinking it's...
  5. Missing Pulleys affecting functionality?

    5.0L Tech
    I bought an 87 notchback a few months back and since I wasn't familiar with mustangs at the time I didn't notice anything strange. Then I started messing with underdrive pulleys and things of that nature and noticed something was strange whenever I looked up a serpentine belt diagram for a 5.0...
  6. 2013 mustang v6 Belt Noise ?

    2011 - 2014 V6 Mustang Tech
    So i have my Mustang 2013 and has about 2500 KMS on it, and since yesterday i hear like a whistle or something from under the hood. My guess its the belt but can take it to the dealer as they are cosed and have to wait until Monday. I was looking through the internet and it seems that there are...
  7. V6 underdrive pulley belt size

    V6 Tech
    Hello i jus got my underdrive pulleys for my 95 mustang and i was lookin around and wanted to know what size belt to get. I know my kit suggests a 96" 6 ribbed belt. I understand the 6 ribbed part of the belt but i saw that some others that had these pulleys used shorter belts other than 96"...
  8. Mustang GT 2003 Auto - Car not starting after Serpentine Belt Replacement

    4.6L Tech
    Hi There, I have a problem with my Mustang GT 2003 Auto... Recently the Serpentine Belt snapped on the vehicle and I replaced it with a Gatorback belt (Same length) no problem with the part at all. I attached the new belt like in this video: youtube . c o m/watch?v=9B02af4rUA0 I'm almost...
  9. 2005 Mustang V6 Crank Pully Rigged?

    2005-2010 V6 Mustang Tech
    Hi guys and gals. First post here. Bought a 2005 V6 with 71K miles on it about a month ago. It had hit a deer and was fixed up. Had a mechanic look at it and the only thing he found was that the belt needed to be replaced.... Last couple of days started having belt noise, primarily at start...
  10. where can I find Intake snorkel bolts?

    V6 Tech
    hello, the guy i bought my 2000 V6 mustang from decided to do a little "DIY" renovation to the intake by taking off the snorkel and putting a spectre filter on. In doing so he lost the bolts that hold the intake to to the inside of the fender. He jury-rigged it so it wouldn't move around so much...
  11. Belt Squeak Problem SOLUTION!

    4.6L Talk
    I finally fixed that annoying squeaky belt on my 03 GT!:kooky: Figured I would share some knowledge. After looking for a while I saw many people with squeaky belts that weren't worn down and at correct tension. I put a few squirts of ArmorAll Interior cleaner on each side of the belt in...
  12. Serpinetine Belt on 1999 Mustang GT

    4.6L Tech
    I am at 117,000 and my serpinetine belt is showing some wear and tear. I am a notice DIY and have not ever changed a serpinetine belt before and I was wondering if I could get some help. Thanks in advance! :) 1999 Ford Mustang GT
  13. 1980 Mustang 302 Belt Help

    5.0L Tech
    Hi guys, I'm new to the forum and I need some help. I'm trying to delete my AC compressor and smog pump on my 1980. I found the right way to route the belt, but my tensioner is pushing my belt down and it's making it rub together on the water pump pulley. I think I just need to go just a hair...
  14. 1980 Mustang 302 Belt Help

    2011 - 2014 V6 Mustang Tech
    Hi guys, I'm new to the forum and I need some help. I'm trying to delete my AC compressor and smog pump on my 1980. I found the right way to route the belt, but my tensioner is pushing my belt down and it's making it rub together on the water pump pulley. I think I just need to go just a hair...
  15. Squeaking sound near belt in 2004 V6 3.9L Mustang

    V6 Tech
    I need some help. I have a squeaking sound coming from the serpentine belt area of the engine. I have tried replacing the idler pulley, tensioner pulley, serpentine belt, water pump and the power steering pulley(broke existing one taking it off). Still my squeak persists. I see on multiple...
  16. 1987 5.0 belt size?

    5.0L Tech
    I have the a/c removed with the Ford Racing A/c Eliminator kit (moving the power steering uP to where the compressor was. The smog pump has been deleted. So I am running a alternator, tensioner pulley, power steering, crankshaft, water pump. I have read that I need a 73" belt, but I have a 70.5"...
  17. Bypassing smog pump. What length belt will i need?

    5.0L Tech
    I want to bypass my smog pump in my 87 stang. What lenght belt will i need? The car doesnt have a/c. Also, what does the smog pump do? Will it screw with anything if i bypass it? Thanks for any help you give me :bigthumbsup...
  18. Alternator/ Water Pump Ticking

    2005-2010 Mustang GT Tech
    Hey guys i just upgraded to a 240A aleternator since i just built a new stereo. recently i have began hearing a ticking kind of sound coming from my engine compatment when i first start the car it goes while it is cold at first consistantly, then we be at random while the car is warm. it also...
  19. 99 V6 Belt Tensioner Replacement- How?

    V6 Tech
    Hey all, over fall break I tried to start my car and noticed a big issue with it... When I tried to start it, it started making weird noises so I looked under the hood and noticed the serpentine belt was nearly falling off. Anyways, I'm on my way home from college for thanksgiving break and I...
  20. 1966 Seat Belt Restoration

    Classic Talk
    The seat belts in my '66 look great on the outside but when you look inside the roller is all rusted and the seat belts are faded. How do you get the seat belts apart to restore them?
Top