Ford Mustang Forum banner

bolt

  1. need bolt size for harmonic damper 1965 289

    Classic Tech
    I am replacing harmonic damper on my 1965 289, borrowed install kit from auto-zone to do install. None of the included studs appear to fit the crank threads. Everything I have read indicates the crank thread should be 5/8, 18 thread. that size stud from the kit is too large the 9/16 is too...
  2. Interior screw list

    Classic Tech
    Hi everyone, i've put most of all interior screws galvanized. And they have a little mixed-up :) Does exist some kind of list of screws and places where they belong? :) Thanks for any response. Filip
  3. 1965 Mustang Front Shock Install

    Classic Tech
    I was putting front shocks in my 1965 mustang and lost a bolt. What size are the threads on the bolts. I know the heads are 1/2 but that doesnt tell me the thread size
  4. comp cams stage 3 (what other parts do I need?)

    4.6L Tech
    Hi I orderd the comp cams stage 3 xe270ah but I read some comments and turns out the stock bolts dosent fit the cams from the 2000 mustang gt 4.6 pi head camshaft bolts. Comp Cams Stage 3 Xtreme Energy XE270AH Camshafts 102600 (96-04 GT) - Free Shipping - AmericanMuscle Anyone knows the part...
  5. Only one left -__-

    4.6L Talk
    How did you guys get the bottom side passenger bolt off? I got both the driver's side easy and then I managed to get the top passenger's with a few extensions but this bottom one just seems impossible. I managed to break it loose with a break over bar and a 12 point socket but dont have enough...
  6. I can't remove the top transmission bolt, please help!

    4.6L Tech
    Okay guys so I have removed everything for me to drop the transmission on my 1998 mustang cobra. I can't reach the passenger upper transmission bolt. I already dropped the read transmission mount, so the transmission can drop to get more room. I still wasn't able to reach that bolt. Do you...
  7. 2002 GT Power Steering Rack Bolts seized

    4.6L Tech
    2002 GT Convertible 134,000 miles. stock Hi All, first time poster here, but I've been browsing this site for years. About 20,000 miles ago I noticed the steering on my car slightly changed (more vagueness when going over bumps) About 12,000 miles ago I began to noticed a heavy creaking...
  8. Bolt sizes for Alternator bracket

    5.0L Tech
    I need the bolt sizes to my 90 LX alternator bracket. It was broken off due to loose bolts, and I need to know the size of the bolts ESPECIALLY the bolt that goes to the Head.
  9. 93 convt staple rail and brackets

    5.0L Talk
    does anyone know where to get the 4 brackets that connect the 23 stapple rails in the well of a convertable? they look like modified c with a carriage bolt
  10. Fusebox remove help

    Mustang II Tech
    I want to remove the fusebox, but I can´t find the bolt that is supposed to be in the engine bay. Someone can post pictures of where is that bolt or a video removing fusebox, I have searched in many pages but I can´t find it. Thanks
  11. Lug dimension 1979 Mustang 2.3l

    Wheels and Tires
    What bolt pattern is on my 1979 mustang coupe? its the 2.3l 4 banger non-turbo. I want to upgrade to some nicer wheels but am uncertain or the pattern. Any idea what it is? opinions on rim style welcome! Thanks
  12. Does anyone know the bolt size on shifter arm?

    2005-2010 Mustang GT Tech
    Hello everyone, does anybody happen to know the dimensions of the bolt that mounts the front of the shifter to the transmission on a manual s197? I lost it and need a new one asap. It is the 10mm that is on the front arm connecting to the trans.
  13. Seat belt bolt dimensions 1965 Convertible

    Classic Tech
    I have an early 1965 San Jose car. I am looking for the size and tread count on the front seat belts. I have the bosses installed from the factory. I had purchased a new seat belt kit but have misplaced the hardware.
  14. New User of Forum, 1997 Mustang 3.8L V6 Tensioner arm/pulley removal problems

    V6 Tech
    Hello everyone, I'm new to this forum and love mustangs. My 1997 Mustang V6 Belt tensioner arm is broken and completely jammed in place. I've tried to loosen it every way possible; i.e. hexagonal allen wrench attached to long pole for leverage, tapping allen wrench with hammer, WD-40 to help...
  15. Cam thrust plate- should I worry?

    Classic Tech
    I installed a new cam in my 69 302 motor. I torqued the cam thrust plate bolts to the recommended 10 pounds, but just realized I didn't put thread lock on them. The motor isn't completely assembled yet, I would just need to remove the timing cover and sprocket to redo the bolts. I'd prefer to...
  16. will Kaenen S281 Wing Fit the stock holes?

    V6 Talk
    I was wondering if the Kaenen S281 Wing bolts into the same holes that are in the trunk from the stock GT spoiler. Anyone Know?:headscratch: Oh and if anyone has any pics of their 1994-1998 Mustang with a Kaenen wing please feel free to post them so I can get an idea what mine might look like:D
  17. How many bolt on Flywheel

    4.6L Tech
    Alright so I'm getting a pretty good deal on a new flywheel and clutch through a friend. The problem is that I don't know whether I need a 6 or 8 bolt for my 2002 Mustang GT.... Hopefully someone can help!
Top