Ford Mustang Forum banner

brake light switch

  1. V6 Tech
    hello i have a 2000 ford mustang. the red wire om the picture below heats up and disconnects. my brake light then stops working and i have to reattach the wire. after a week or so the wire heats up again and i have to do it again and again. any ideas why the wire does this and how can i fix it...
  2. 2.3L Tech
    Recently I found that I have no brake lights/tail lights. Quick look at my brake light switch I found one of the wires (yellow) disconnected. When I reattached it brake lights worked again. However, its almost like something is sticky in there, because my brake lights will stay on unless I hit...
  3. Classic Tech
    Hello, on my 1965 Mustang (with non power disc brakes) my taillights, and turn signals both operate normal. But my brake lights during all circumstances only work sometimes, no matter how far or how hard I depress the brake pedal. Is there anyway the the brake light switch needs adjustment or...
  4. V6 Tech
    I have a 2002 Mustang V6. My rear brake lights and shift lock actuator are not working. I checked the voltage to the brake switch (light green w/red stripe) and it was getting voltage. Now here's the real problem - there's no voltage when the brake pedal is pressed. I replaced the switch (one I...
  5. Classic Tech
    Ok here's whats going on I just got a new wire harness from headlights to tail lights i got a new head light switch and new brake light switch, now every time i hit the brakes the lights dont turn on but when i turn on my head lights they turn on but dont get any brighter when i hit the brakes...
  6. 5.0L Tech
    Ok i installed a new brake light switch because i thought mine was bad because i had no brake lights the bulbs and fuses were good so i replaced it put every thing back the way it came out and still no lights so i took the new one back off left it plugged in tripped the switch manually and...
Top