Ford Mustang Forum banner

break

  1. On my setup, what will go first??

    2005-2010 Mustang GT Tech
    Title pretty much explains it. So in a short essay, i have run into an X amount of money which is substantial, i figured why not put it in the old stang'. Right now I have Mutha Thumpr Comp cams, CAI full exhaust and pulleys with a dyno tune, i will VERY soon own a 2.6L Stage 2 kenne bell, Stage...
  2. 97 V8 Mustang GT - Awful Winding Sound!

    2011 - 2014 Mustang GT Tech
    Hello, my mustang recently developed a winding sound. At startup, there's nothing.. then when I apply the break, and/or turn the wheel, the sound comes and also gets more severe as I apply more of the break, and or turn the wheel further. After 20min of driving and engine has warmed up to...
  3. 302 starter problems

    5.0L Tech
    I've got a 302 that has broke two starters right off its bolts. It seems to bolt on well and be straight and no cracks in the housing. Any ideas, I'm completely frustrated.
  4. 2003 Mustang GT rear rattle and clunk noise while driving

    4.6L Tech
    Hi! First off, I am new here and I recently got my first car; a 2003 Ford Mustang GT. Before buying it I took it to a Ford dealership to have them inspect the car to see if there was anything wrong with it, they were surprised by how good the condition on the car were. Anyways, not even a week...
  5. 1999 Rear Brake Rotor / Pads Excessive Wear

    V6 Tech
    Hi all, Lately I've been hearing a noise coming from the back of my car. It sounded like something was dragging, not lubricated... metal to metal. I was able to lift my car up this morning and found out that the rear brake pads are fine on the outside but are completely worn away on the inside...
  6. disk break conversion steering issue

    Classic Tech
    I swapped out my drum brakes on my 66 coupe with disks from a 69. They work well but the calipers hit the steering stop on the strut bars limiting my turning. Can I take these stops off or do I risk oversteering and binding my assembly. I have manual steering. Id like to keep the later brakes...
  7. 2005 V6 Brake light problem

    2005-2010 V6 Mustang Tech
    Hi all i have a 2005 V6 and the brake lights have all stopped working, i still have power going to the switch on the pedal and from it when the pedal is pressed but it is not getting any power to the back?? i have checked all the fuses more than once and cant even find the fuse relevent to the...
Top