Ford Mustang Forum banner

brembo

  1. 2011 - 2014 Mustang GT Tech
    Hey guys, I just joined and can't find a whole lot of info about using a 285 wide tire all the way around. I'm 99% set on getting 285/35/19 Continental DWS 06 all the way around. I'd like to see what it's going to look like installed. Anyone have any good photos of a car with this size tire...
  2. 2011 - 2014 Mustang GT Tech
    Hey guys, I am currently in the process of buying Brembo takeoff brakes for my Mustang and was wondering if I could get some opinions on the condition of a set that I found. Thanks
  3. 2011 - 2014 Mustang GT Tech
    I was driving down the highway at about 60mph when my left rear tire locked up then it released or i thought it did. when i went to get off on my exit i noticed a grinding noise from that same left rear tire so i pulled over and noticed the brakes where still seized to the rotors as well as the...
  4. 2011-2014 Mustang Talk
    After months of research, I finally had my appointment yesterday to lower the beast. The install went very smooth yesterday. In fact it even reduced a driveline noise (documented in another thread). Anyhow, I got the Eibach Pro-Kit springs installed with an adjustable BMR panhard bard and BMR...
  5. 2011 - 2014 Mustang GT Tech
    hello I have the premium brembo package and am wondering what pads should I get for my front? I was looking at these: StopTech Street Performance Mustang Brake Pads - Front 309.10010 (07-12 GT500; 12-13 Boss 302; 11-14 GT Brembo) - Free Shipping But I was hoping to find some hawk pads...
  6. 2011-2014 Mustang Talk
    Is there a difference in the 6 piston setup on the new 2015 GT vs the 2013 Shelby? Also I'm looking to upgrade to the 2013 shelby 6 piston setup, but was wondering what stainless lines I would need to order to go with them. I've great things on the stainless braided brake lines, but can't find...
  7. 2011-2014 Mustang Talk
    I have a 2013 mustang with brembo brake package. I need new tires but want them to be wider. I decided I'm going to go michelin pilot super sport tires. I was just curious about size. I have 2 options 275/35/19 tire or a 285/35/19 tire in the super sports. I am just afraid the 285 will rub up...
  8. 2011-2014 Mustang Talk
    I just bought a set of 2013 brembo track pack wheels for my base 2011 v6 auto. I have read mixed threads about them rubbing and them possibly needing spacers. Will I need spacers or anything else? Should I also request a new tune from bama? I'm going from stock 17 BFGs to Pirelli Pzero...
  9. 2011-2014 Mustang Talk
    Empty back roads, cool crisp spring air, low rumble of the exhaust, a few birds chirping, sun coming up over the hood. Take a deep breath. Faint smell of exhaust and early morning dew. As the sun first crests over the horizon, you close your eyes and feel that gentle warmth on your face. You...
  10. 5.0L Talk
    Hi Everyone, I'm sure this question must have been asked and answered before but I can't find a direct reference or an explanation. On the Ford external marketing site they describle the Brembo Brake Package as having "unique electronic stability control" and "agressive suspension tuning" but do...
  11. 2011 - 2014 Mustang GT Tech
    I am looking for some nice big brake upgrade kit and am looking at different brands and versions. As far as I know there are some brands that have Big Brake Kits for our Mustang GTs: Brembo, Wilwood, Bear, Stoptech, Steeda, Roush Some of those offer kits for front and rear brakes. I know most...
  12. 2011 - 2014 Mustang GT Tech
    Just signed up, looking for help/advice. I have a 2011 Mustang GT Brembo with 3.73 rear and carbon fiber LSD clutch plates (all factory, car is 100% as it came from Ford). Around 32k the pinion seal went bad for no apparent reason. My dealership replaced it under warranty, but did NOT replace...
  13. 2011-2014 Mustang Talk
    Here are some pics of my 2011 GT/CS after a long awaited car wash. This is with my winter wheel setup. Blizzaks on the stock 19" CS wheels. Also notice the latest mod, Roush rear side splitters. They claim they are for the 2013 but fit the 2011 just fine. Really finishes the look with the Boss...
  14. 2011 - 2014 Mustang GT Tech
    I know this topic may seem to have been beat to death, but I have some specific questions that I haven't seen answered on here yet... I just changed all my rotors, pads, and fluid (EBC rotors, Hawk HP+, Brembo LCF) and manually bled fluid. Used 1.5L of fluid, everything was clean with no...
  15. 2011-2014 Mustang Talk
    I finally finished up the last project that I have been working on for a few weeks now. I wanted to add the GT500 Brembo brake kit upgrade, but due to the 2 sets of 19x8.5 wheels I knew I was going to need wheel spacers to make these calipers fit. In addition to installing the Brembo kit, I...
  16. Introductions
    Hey guys! Just checking out the mustang forums. Got a 2011 Mustang GT and love it, but I gotta sell it for financial reasons.
  17. 2011-2014 Mustang Talk
    Im more of a lurker on the site but I was so excited about my ebay find that I had to post. I was up lat night looking around on the bay for brakes and wheels when I found a set of Brembo wheels and tires, I never found the brakes I was looking for so I closed the bay out and called my wife to...
  18. 2011-2014 Mustang Talk
    It's time to get new tires for my car and wanted to ask if anyone has any recommendations. Here is my driving conditions: 98% of the time on the streets and 2% on track (don't want to get two sets to change tires since I don't go to the track all that often, maybe 2-3 times per season). I want...
  19. 2011-2014 Mustang Talk
    Hey guy, I'm looking into getting a new car and while I was on Ford's website, I noticed that I couldn't add the brembo and CS package together. I wanted to know if that was forced, or if that was just how it is on the website? I really like the CS package's visual appeal, but I hear a lot of...
  20. 2011-2014 Mustang Talk
    just FYI, they fit nicely on stock brembo wheels. overall diameter should be .4" less, but honestly they're maybe 1/4" taller than worn out pirellis. no rubbing and I'm lowered a little bit. those who don't want these because they fear they may be too short, i wouldn't worry about it. before...
Top