Ford Mustang Forum banner


  1. New to AFM

    Hey everyone, New to AFM and wanted to introduce myself. Currently working on a 15-Mustang V6 engine swap and full upgrade project. Thought I'd join to get some advice pretty soon and share the build. Take care and happy holidays! Tyler
  2. Current build

    2005-2010 Mustang Talk
    Hello everyone. This is my 2007 4.0 V6 Mustang 8 months into its build and I felt like sharing my progress. I hope to have the car running in about a month at 500 RWHP. As of now the only parts missing are an 8-rib pulley set, mounting brackets, welded fittings on tanks and inter-cooler for...
  3. Turbo V6 Daily Driver Build

    V6 Talk
    Hello Everyone! I am currently driving a stock 2002 V6 Mustang and would like to turbo the car just for the sake of getting some more power out of the car. This is my first car, so it has quite a bit of sentimental value to me. I have looked at buying a 2004 Mustang GT but there are so many of...
  4. Help to prepare for Procharger P1SC installation 99 GT V8 4.6

    4.6L Tech
    Hey everyone, 99 mustang GT I just picked up a used P1SC Procharger supercharger kit! I am really excited and want to start getting everything I may need for the install. Does anyone have any recommendations as to what I should get for a smooth and strong build? After market Pullies? What...
  5. Help putting together a build.

    4.6L Tech
    Hello everyone, I'm trying to find parts for a build I want to do this coming winter here's what I have. 99 GT 5 speed 3.55 ford racing gears 4.6L Windsor block 2.1L intercooled kenne bell supercharger K&N Boost a pump I'm looking to get a smaller pulley and get more power out of my car. It's...
  6. Looking for a good tuner

    Drag Racing
    Im new to the Kansas area, I just recently got stationed here and am planning to do a full motor swap and make some big power. With that of course comes tuning and theres a local tuner in town but I was told to stay away. I would be willing to drive a little ways if it means a good safe motor...
  7. 2008 4.6L engine build

    I have just recently bought myself a 4.6L three valve engine that i want to build into a power house. I have as much time as I need to build this engine and I don't want to cut any corners. I want to set it up for a daily driver that puts a line of rubber from my driveway all the way to the town...
  8. Turbo Build

    V6 Talk
    Alright so you may know i have the 02 3.8 split port v6 swap. but Im kinda looking at doing a 94-95 5.0 build... i work at Team Z Motorsports and gonna go with their full front kit. That would be upper and lower control arms, coil springs, and tubular k-member. however, I don't really know where...
  9. 98gt 4.6 or 302 build

    4.6L Tech
    so I have a 98 gt with a stock engine. I was looking to trade for a 94 cobra clone with a built 302, it I bored to 306, cams, intake, head work, and long tubes. Also looks ALOT better. is this worth a trade or even me adding some on top or is this a dumb deal?
  10. 4.6 2v Engine Build Part 2: Head options?

    4.6L Tech
    So today I finally got everything removed and the old block sitting on a stand next to the newish shortblock. I dropped off my pistons and rods at the machine shop so they could get the correct bearings and check for any issues. At this point I have all the parts I need to build the shortblock...
  11. 4.6 2v Engine Build

    4.6L Tech
    Before you begin reading, thanks. Just to start this title is a statement and not a question. So first off: Did you try searching on the forum? Yes, 99% of the posts I read where people asking if they should and 'oh im a college student and I want to do a budget build'. I want to build a 4.6...
  12. 01 cobra terminator conversion?

    SVT Cobra Tech
    Hey guys I have an 01 cobra that I want to supercharge. My main question is would it be easier for me to just rebuild my engine with forged internals and cams then get the 2.2 L kenne bell supercharger or would it be better to buy a 03/04 terminator engine and tranny as a drop in. The only...
  13. 351c budget build camshaft advice

    Classic Tech
    I picked up a 1971 351 cleveland block that has been prepaired with TRW flattop pistions .040 over. crankshaft turned .010 with new bearings. The heads are 2v 1971. The heads have been redone. It appears they installed new double springs. rotating assably has been balanced. I also have a...
  14. 5.0 engine build. Opinions needed!

    5.0L Tech
    I am building a 5.0 engine over the winter with hopes to drop it into a fox over the summer. I will be grabbing a 5.0 from the junkyard after great inspection, re-ring the bottom end but leave it stock. Doing the classic h/c/i on top. Obviously I am on a budget and my goals are a street car...
  15. 4.3 Start-up..

    V6 Tech
    Hello everyone, I am new here, and am having some problems with my latest build. I have a 2000 mustang v6 3.8 that I have made into a 4.3. I have a cam: 224/230 .54/.54 LSA 114, a 4.2 crank from a 2001 f150, custom forged wiseco pistons: 9:1 comp, and forged eagle long h-beam rods, 255LPH...
  16. Will You Ever Be "Finished" With Your Build?

    Mustang S197 Off Topic Lounge
    Maybe it's just me but I have yet to own a vehicle that I didn't want to change something about. Aside from driving, personalizing and improving the performance of your car can be one of the most enjoyable aspects of ownership. We all know that one mod leads to another but when does it stop...
  17. 5.0 engine building help

    5.0L Tech
    Hello everyone I'm new to the forums I have a 2001 mustang v6 with a blown eng it has a t5 transmission I recently got a great deal on a 5.0 block it has crankshaft and pistons 105k and never had issues its from an f150 I want to build it strong but don't want to spend a lot of money like a 1000...
  18. Question about my build with ported E7

    5.0L Tech
    Hi, i'm thinking about a build but i'm not sure about it, i did some research but i want to know if my build match together. First, i bought the car completely stock last years then i did, Cold air Intake BBK Ceramic LONG tube header BBK X-pipe BBK Catback flowmaster I'm also on budget...and...
  19. 5.0 Engine Build

    5.0L Tech
    So I'm new to the 5.0 section because I usually post in the classic tech section and I'm not sure if this is the right place to post this so site administrators move it to where it needs to be :winks I wanna build up a 302 5.0 everything entirely new and entirely different from stock (of...
  20. All about my beast, a build log of sorts.

    4.6L Talk
    Well, it's finally time to inform the AFM community about my ongoing project(s). I browse these forums pretty frequently (this and an explorer forum are my homepages) and I occasionally make some posts when I get over-zealous. But now it's time for me to contribute, and hopefully make an...