Ford Mustang Forum banner


  1. Rear Brake / Caliper Issue

    Mustang S550 General Discussion
    Hey everyone. I have an issue but I am not 100 % sure what it is or what is causing it. Leaving work the other day I rolled my windows down because it was a nice out. I drive past the wall and garages, I hear this slow scraping sound (10-20 mph) reflecting off the wall about 3-5 feet away...
  2. 1966 mustang brake problems

    Classic Tech
    Hi this is my first post here I have a 1966 mustang gt and this all began when I finally got my car on the road. My fist problem was the driverside caliper locked up so I bought a new one then I was driving to school and the passenger side caliper locked up I was able to get it home now after...
  3. Brake hose to caliper adapter 1968 fastback

    Classic Talk
    My new 9" rear with disc brakes is using a 10mm fitting on the caliper for the brake hose to attach to it. I would like to use the stock brake hoses for the 1968 mustang. Is there an adapter that the brake hose attaches to and then will attach to the 10mm fitting on the caliper?
  4. Painted caliper color

    2011 - 2014 Mustang GT Tech
    Why does everyone who paint their calipers, paint them red? Has anyone with a black car painted them a different color? if so you can you send me some pics?
  5. Issues with Draglite rubbing caliper on 91 LX. Help!

    5.0L Tech
    Ive got some 15x7 draglites for the front of my 91. Not sure of the backspace- looks like about 5". The front left fit decent, just barely scraped the caliper bolt. The front right however, different story. The wheel was bound up so bad, it wouldnt turn. At first, ithought the wheels were...
  6. 2005 Mustang GT Rear Caliper Piston Resetting

    2005-2010 Mustang GT Tech
    Hello all, this post has 2 purposes, as it is my first post on these forums, so I would like to say "Hi" The second purpose is to share my experience with rear brake calipers on the 05 GT. Recently i had to replace my rear axles (went with Moser axles, love them). In the process of...
  7. Suggestions On Caliper Color For Two Tone Mustang

    2005-2010 Mustang Talk
    I have an 06 two tone mustang, black and white, v6. I was thinking about red but so many people have that and I am really not sure if I want to have 3 colors on my car anyway. That leaves me with black and white. I've googled some images but I can't find any with two tone cars. Suggestions...
  8. Plugging brake lines while calipers are removed?

    2005-2010 Mustang GT Tech
    In the next week or so I plan on upgrading rotor, pads and painting my calipers. I would like to remove all 4 calipers and brackets to perform the clean up and painting on my work bench instead of on the car. I seem to be at a loss about how to plug the end of the brake line while I have these...
  9. e-brake spring and brake dust

    V6 Tech
    I was replacing my brake pads and I removed the e-brake spring for better access to one of the bolts, only to find out that it's not easy to put the spring back on. So the rear-left brake caliper does not have the spring on it. Then I started noticing too much brake dust on the left front wheel...
  10. HELP! 2004 Rear disc brake squeal!!!!

    V6 Tech
    okay so i did a rear brake job on my 04 stang about a month ago. I replaced the rotors and pads(pads were organic). ever since then i had a "squeal". it ticks me off and ive tried everything i can think of to fix it. I lubed and replaced the slide pins, upgraded to ceramic pads, even lubed...
  11. 2007 Mustang V6 Rear Brake Caliper Issues

    2005-2010 V6 Mustang Tech
    So I recently put stoptech crossdrilled rotors on my mustang along with some stoptech brake pads. After lubing up all of the slide pins, pushing in all of the pistons, etc. I took it for a test drive. Halfway through the test drive i noticed that the engine sounded like it had stress on it when...
  12. HELP - Rear Caliper - where from?

    5.0L Tech
    Need help ordering replacement calipers, but can not figure out were this originates from. Attached are photos of the caliper, rotor and rear end. HELP ... Please and thanks Edit: 87 Mustang with a 5 lug conversion. I can't find a caliper that looks like this one.
  13. Break line leaking at banjo bolt, need suggestions

    4.6L Tech
    Hey guys, I have a 1997 GT and recently I started to hear grinding noises from my back breaks (skipped squealing and went straight to grinding). I assumed it was simply my break pads needing replaced but when I pulled the wheel off on the passenger side I noticed that the roter had only been...
  14. 1993 lx Mustang disc brake diagnosis. caliper? pads?

    5.0L Tech
    the other day i was braking down from 75 mph to 0 getting off the highway and i found myself pushing the brake pedal almost all the way to the floor... i pulled over and found the right front wheel slightly smoking and the brakes were significantly weakened. when i got home i took the wheel off...
  15. 1984 Caliper Bolts

    2.3L Tech
    Guys, Does anyone know what size of Torx tool do I need to remove the caliper bolts on my 1984 Mustang LX? Thank you.
  16. can i install sn95 front calipers w/ stock master cylinder?

    5.0L Tech
    i just installed bullitts on my 91 and i need to do the sn95 brakes up front due to the dust caps. i currently run the mark vii rotors and ranger axles and drums. my question is, can i only use the v6/gt caliper setup or can i go straight to the twin piston 38mm calipers if i leave the rear...
  17. Ebrake/ Caliper suck HELP!

    2005-2010 V6 Mustang Tech
    So I stored my cra this winter and somehow the Ebrake got left on So when I took it out and drove it It felt extremely sluggish and wants to go to one side, there is the smoke and smell of burning rubber aswell. At first I thought I had a flat tire but when I touched my rim it felt hot! I...
  18. Brake Upgrade: 2010 v6

    2005-2010 V6 Mustang Tech
    Hey guys, so I love my car (as do pretty much all AFM users) but the thing thats bugging me right now (in addition to not having an x-charger :kooky: )is the general lack of stopping-power. My father, for instance has 2005 Chrysler PT cruiser 'Vert High Output Turbo (a pleasant 240 hp) and the...
  19. my first problem....:(

    2005-2010 V6 Mustang Tech
    my right rear caliper is sticking and is squeezing the rotor when the brakes are not applied. i can smell it when i get out of the car after only 3-5 minutes on the road. i can feel the heat around the entire right rear wheel and the left rear is cold. what do i do about this?