Ford Mustang Forum banner

camber

  1. Help Sorting Out Suspension/Alignment Issues?

    2005-2010 V6 Mustang Tech
    Hey guys, I purchased a 2005 Mustang V6 recently. Going into the deal, I was aware the car required some work, namely, the suspension. However, the price was right. I also took this as an opportunity to learn. I'm a beginner to mechanic work, so if anybody could help me out and answer some of...
  2. Suspension help. front struts binding.

    2005-2010 V6 Mustang Tech
    Good afternoon my fellow stangs. Recently (two weeks ago) I installed eibach sportline springs, eibach pro dampers, and J&M camber plates. Now, here's my problem. After the install I noticed that at very low speeds when ever I turn (right or left) there is a popping sound more noticeable in the...
  3. Excessive camber after pothole 2006 GT

    2005-2010 Mustang GT Tech
    My 2006 GT has been having excessive camber after a massive pot hole. It bent the rim but I got it repaired, and I also changed out the control arm. I have looked down there and nothing seems to be obviously wrong, and Firestone said that it won't go back to factory specs. Do y'all have any idea...
  4. Lowering Project for the Winter

    4.6L Talk
    Hey guys, I am going to Florida this Christmas and I have been back and forth on what to do with my Mustang while I am there, and I have decided lowering it is what will give me the most bang for the buck. My budget is set to 1000-1100 dollars. I made a list and plan on ordering everything from...
  5. Is Camber on stock 03 gt normal?

    4.6L Tech
    Hi guys, I just have a quick question. I have about a degree of negative camber on my 2003 gt. I was just wondering if this is normal. My car isn't lowered at all. I know this isnt going to hurt my tires too bad, but if it is t normal im going to fix it. My car only has 86k but it could be...
  6. Eibach Sportlines Alignment

    2011 - 2014 V6 Mustang Tech
    Well after one set of tires and a year after lowering my car, i decided getting an alignment was on the agenda. Thought i would make this post for anyone wanting to know exactly how in/out of spec the car could be with stock setup besides springs. I have had the springs on for around 15k miles...
  7. Free Camber Mod Pics and Review

    2011 - 2014 V6 Mustang Tech
    As you folks may be aware, there is a factory procedure to increase camber that involves slotting the lower strut bolt hole. This can be found in the 'factory service manual' link at the top of the forum. My front tire outer edges were getting destroyed and the understeer was super lame, so I...
  8. A arm lowering question, camber correction

    Classic Tech
    Hello all, Going to do the upper A arm lowering correction for better handling on my '66 GT. Street driver, probably mounting 16" torque thrusts. Most likely keeping stock GT spings, sway bar. Will be going with poly bushings, better shocks for sure. I know there are two popular "A" arm...
  9. 2011 Lowered GT Camber Fix: Camber Bolts vs. Slotting the Strut Mounts.

    2011 - 2014 Mustang GT Tech
    Here's my situation: I recently lowered my 2011 GT (Brembos, 3.73s) with BMR springs. I believe it was about a 1.25-1.5 inch drop. I was hoping (although I knew better) that I could get away with NOT installing some form of camber adjustment. No luck, the lowering springs obviously added a...
  10. Rear camber adjustment on lowered 2006 gt

    2005-2010 Mustang GT Tech
    Hi i have a 2006 mustang gt roush and i put ebaich coil overs into it and lowered it probably about 3 inches with 1 inch wheel spacers in the rear i have two questions, First why is my left wheel/tire about 1/4 inch out fauther from the body then the right? is there any way to lower it fauther...
  11. 2004 GT Mustang 40th anniversary, Lowered, Castor camber plates

    4.6L Tech
    I got 2004 GT Mustang. The car was lowered and the camber on the front wheels was a hair over 2 degrees negative. The car is tracking holes in the road, also the tires are wore out on the inside. I purchased castor camber plates from Granatelli, got them installed but it would not adjust the...
  12. Which caster camber plates are better?

    V6 Tech
    I was wondering which are the best caster camber plates to get and why? Are they all pretty much the same? Also does anyone know if they all allow for a strut tower brace to be installed?
  13. Trouble with Alignment

    2005-2010 V6 Mustang Tech
    Im kinda new to this forum... i hardly ever post anything but i see that many of you are very helpful to everyone. Hopefully u guys can help me with my pproblem Well about two years ago i got 20 inch rims and falken tires on my car. I asked the guy at discount tire, if anything would change or...
  14. 1997 Mustang V6 Coupe Camber Setting?

    V6 Tech
    Hi, I've been trying unsuccessfully to find the camber setting for my 97 V6 coupe. I have a Chilton repair manual, which also gives me no information. Searching the forums for alignment, camber, etc., did not provide useful results for my model year. I'm hoping to find an answer on this thread...
  15. 2006 Mustang V6 camber is off since lowering my Mustang

    2005-2010 V6 Mustang Tech
    :shiny: I installed a set of Steeda Ultralight lowering springs on my 2006 Mustang Pony, and now the camber on the front tires are off (Im riding on the inside of my tires!!!) My Mustang is my daily driver and I dont want to have to replace the tires on my 20's every 4 months because the tread...
Top