Ford Mustang Forum banner

caster camber plates

  1. The Search for Caster Plates

    2005-2010 Mustang GT Tech
    The Search for Camber Plates Does anyone here have any first-hand experience in running with Vorshlag's latest Caster Camber Plates? Their latest iteration of their S197 plate is a robust design with a solid spring mount. I am preparing for a HPDE next month, and my front struts are in need of...
  2. Caster Camber plates for Eibach Multipro R1 coil over

    2005-2010 V6 Mustang Tech
    I bought BBk Caster Camber plates for my Eibach R1 coil over kit to find that the plates are manufactured to take the stock springs, (see attached). If anybody has any ideas on how to work around this complication i'd want to hear them. If its not possible, are there other options for plates...
  3. 2005 Mustang v6 Eibach Pro Kit Plus Knock

    2005-2010 V6 Mustang Tech
    I installed the Eiback pro-kit plus last weekend. Kit drove great the first three days. There's more noise entering the car in terms of thuds going over bumps because of the stiffer springs. But that was expected and reasonable. However, yesterday, after about 250 miles, there's now a...
  4. caster/camber plate questions

    4.6L Tech
    i just bought eibach sportline springs and struts and im looking at different caster/camber plates to install on my mustang. i was looking at the J&M racing and the maximum motorsports caster/camber plates. i noticed that these plates have the 4 bolt configuration and some have the 3 bolt...
  5. UPR 94-04 caster camber plates on a foxbody

    2.3L Tech
    Hey guys i have a 90 lx and there's someone in my area selling caster camber plates for a 94-04. Im just wondering if anybody knows if I would be able to use those on my car? As far as i know it shouldn't matter, maybe just drilling an extra hole or few? :shrug
  6. Xmas comes early- Springs + CC plates... wondering if LT's will scrape in future

    4.6L Talk
    hey guys looks like Xmas will come early this year for me. After completing my engine rebuild i bought some AM cobra r rims 17x9 and 17x10, some H&R Super Sport springs, urethane isolators, with some MM C/C plates- and i am fairly excited to get this car underway... again I almost got the Race...
  7. thinking about lowering my ride

    V6 Tech
    yo, so ive been tossing around the idea about lowering my 03 v6 and need to get some info. before i decide to order the parts. the car has the stock suspension the tires are 17" but i have the 10.5 in the rear and 9" in the front (Rear 315/35/17) and (Front 275/40/17) i wanna lower the car as...
  8. Rattle/Knocking from Suspension

    4.6L Tech
    I recently installed new front struts and caster camber plates, (I installed lowering springs a few months back) and since I installed the c/c plates there is a rattle/knocking noise coming from what sounds like the front suspension. I have checked to make sure everything is tight, I even had an...
  9. new caster camber plates

    4.6L Talk
    i ecently lowered the front of my 97 gt just over two inches so no surprise i purchased a set of upr caster camber plates. just wondering how long it might take to install them thanks guys