Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 14 Results
  1. Classic Tech
    Hey guys, I was wondering you guys could tell by this picture if my car has been lowered by the previous owner. It just feels like its pretty low to be stock. Also I bottom out on almost every speed bump with my exhaust pipes. Do they look too low? We just had all new exhaust put in by a really...
  2. Classic Tech
    Hey all, I'm looking to install a 1" front sway bar on my 65 mustang. I was wondering about any clearance issues since my car has a 351w in it. Thanks.
  3. Classic Tech
    Hey, so i was at .006 clearance on my mains before, went one bearing size up to .002 and now have .001-.0015 clearance, i plan to run the engine off syn royal purple, 10w30 or lucas syn 10w30. Do you think i can get away with this kind of clearance? Car craft says i need .0025-.003 I'll be using...
  4. 2005-2010 Mustang GT Tech
    I have recently put on some new wheels/tires combo on my bullitt and now I hear a clicking sound. The wheels are 18x9 front 30mm offset 18x10 rear 40mm offset on 255/45s 285/40s, staggered. I did a quick check to see any rubbing issues with the wheels and couldn't see any noticable rubbing. I...
  5. Classic Tech
    So I have been restoring my 68 coupe and she is painted and slowly getting put back together. I never had the original wheels, but came across 2006 GT 17" torque thrust wheels. Powder grey interior with polished aluminum outer lip. They look amazing but I'm concerned when I put them on, they...
  6. Classic Tech
    1966 mustang coupe. I currently have 14 inch magnum 500s. It's time to put on a set of new wheels. I was thinking about the dimensions and want to keep it classic. I am looking at a set of torq-thrust d vintage 15X6. Any thoughts on this dimension?
  7. 2011-2014 Mustang GT Tech
    I'm looking for some input and sugestions on a "clanking" issue I have with my 2011 GT with a Magnaflow Competition Cat Back (15590) and Ford Racing Springs (M5300K). I installed Ford racing springs on my car but have not done the shocks yet (on the way). I would greatlly appreciate any useful...
  8. 2005-2010 Mustang Talk
    I am thinking about swapping the stock mid-pipe for an O/R Prochamber. Does anyone with a Prochamber have gorund clearance issues with 1" or more drop? I have Bassani SS Street axle backs, this is the sound I am looking for YouTube - '06 Mustang GT Bassani Axlebacks and Mac Prochamber
  9. V6 Tech
    I need some help, My dads got a small block chevy engine and we are thinking about dropping in into my 1995 mustang, My question is will we have any oil pan and exhaust clearance problems? If so, how bad will they be? Thanks for your time & help.
  10. Classic Tech
    Good news: The 1965 mustang restoration is complete! Bad news: Still working out some quirks including rear tire clearance. I have the Scott Drake 15x7" styled steel wheels and BF Radial T/A tires on the car. Also used the mid eye leaf springs to lower the rear end about an inch and it...
  11. 2005-2010 Mustang Talk
    i just got JBA shorty headers, kept the stock cats, cut the y-pipe off and replaced it with a x pipe, put in two 5" round borla mufflers, then have the pipes coming out right infront of my rear tires. now, i have three-ish inches of clearance. any advice to help raise the pipes?:happyhapp
  12. 2005-2010 Mustang GT Tech
    Hey, I was just wondering if anyone knows the ground clearance for the stallion III (or black magic) bumper kit for the 2005+ mustangs. It is this one.... 05-08 Ford Mustang Body Kits. I think it looks sweet, but I'm worried about the ground clearance on my driveway.... I have 9" clearance...
1-12 of 14 Results