Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. 2011-2014 Mustang Talk
    I have a couple questions about bleeding my brakes. I replaced all the flexible lines for my brakes with braided stainless steel lines. I put in new rotors all the way around and new pads. I also installed speed bleeders, and have a manual transmission, which I understand uses the same fluid...
  2. New Member Introductions | No Tech Questions
    I noticed my clutches were slipping on my 2005 mustang gt. I replaced the factory clutch with a Ram clutch and Ram pressure plate. I installed the transmission back onto the motor bleed the clutch.(My brother pumped the clutch 15-20 times while I loosened the bleeder screw for about 15 times...
  3. 2005-2010 Mustang GT Tech
    I just put a new centerforce clutch in my car and it worked perfectly fine for about 2 days then one day i noticed the engage point was getting closer and closer to the floor then in the middle of a 3 hour trip it went so far down it would not let off to where I could switch gears while I had it...
1-3 of 3 Results