Ford Mustang Forum banner

clutch cable

  1. 5.0L Tech
    I've been having clutch cable issues ever since I got my clutch replaced less than a year ago, my third cable broke and I replaced it myself this time with a Ford Motorsport Adjustable clutch cable and paired it with a Steeda double hook clutch quadrant and firewall adjuster. The clutch feels...
  2. 4.6L Tech
    Hey guys, I bought this 2000 mustang about a year ago from this POS of an owner who has failed to have stated anything correct about this car except it was GT and had a 5-speed in it. He claimed, when i bought it, that it had a stage 3 racing clutch in it. I honestly did not care about it that...
  3. 2005-2010 V6 Mustang Tech
    i was driving and the vehicle was overrevving while i was accelerating. then i lost almost all acceleration and the vehicle stays running in gear, even when the clutch isnt depressed. right before i lost acceleration the pedal dropped to the floor and only returned about a quarter of an inch...
  4. 5.0L Tech
    Probably a stupid question but how do you remove the clutch cable from the.bellhousing on A 95 svt am I supposed.to remove it from the pedal first? I am trying to change out my clutch thanx in advance for the help.
  5. 5.0L Tech
    I am new to this site and new to Mustang ownership, but not to tinkering and fixing cars. I recently picked up a 95 Mustang GT convertible and have been fixing it up some and tinkering around with it. The car is 100% stock and has some issues that I have solved using the forums here and several...
  6. 4.6L Tech
    Tonight i was driving on hoghway and a friend of mine wanted to make some pulls and we went on 2nd gear and as soon as i step on it my clutch cable came of the quadrant. i put it back in the quadrant on the road thinking i was going to be able to drive home. I was wrong. The car wont go in gear...
  7. 4.6L Tech
    So i was driving down the road with a buddy ready to make a pull and my cable came of the steeda quadrant. so i lost the pedal loose to the floor. i stoped took the quadrant out and reconected the cable. now while the car is on it wont go on gear, any gear. car off will go. while car is off i...
  8. 5.0L Talk
    It's about that time of year and ready to drive the 5.0..so I am about to submit an order for one of these. I want a new quadrant because I read it will make the clutch easy to engage :bigthumbsup 79-04 Ford Mustang Clutch Cable Quadrant & Firewall Adjuster 3 Piece Kit | eBay...
  9. 5.0L Tech
    I have a 1993 lx originally a 4 cyl that I converted to a 5.0. I bought a t5 and bell housing from someone to replace the 4 cyl t5 and a 5.0 clutch cable and installed it with the transmission. when the engine is running the car wont pop into any of the gears and the pedal feels real stiff, when...
  10. Introductions
    I recently installed a new aluminum clutch quadrant and firewall adjuster to go with it, as well as a brand new cable. Everything seemed to be working fine, but then out of nowhere there is a lot of slack in the cable. The cable is stll attached at both ends. There is atleast 1 inch slack in the...
  11. 2.3L Tech
    I recently took my clutch cable out (the big one) and am having major difficulties putting it back in. I was not around when it was taken out, as it was supposed to be a one night thing and I went to pick up the cables I needed. I now have the cable attached where needed except at the firewall...
  12. 5.0L Tech
    i have a 91 mustang gt and i am pretty sure it was a auto before but it has a t5 in it now... the past week i have gone thru three clutch cables from autozone.. it keeps pulling the inner chord housing that surrounds the cable out of the end on the firewall side. i am ready to burn it to the...
  13. Classic Tech
    I am working on putting a later model 302 into my 66 coupe originally built with a 289. So far we have tried two sets of headers - including a set of reproduction K-code headers -listed for a 66, but both sets come into contact with the clutch cable for the original 3-speed transimition. What...
  14. V6 Tech
    is there a adjustment for the cable on the clutch? i just instaled a new clutch&rebuilt transmision and the clutch petal feels like its only ingading half way threw.
  15. 2.3L Talk
    60 IN OR 3 FOOT CLUTCH CABLE?? I've got a 2.3L with the 5 speed tranny. I've been using the 60in cable and have had to replace this cable about every two years, it looses it's strength and it's gets hard to shift, once I replace it it's like a brand new clutch. I ordered the shorter cable...
  16. 2.3L Tech
    Hey guys and or girls, The second issue I had yesterday when I drove my 1990 2.3 n/a 5 speeder mustang for the first time since I started working on it was that the clutch was sooooo deep in the pedal cycle. I replace the old drivetrain with a new clutch, flywheel that was in good condition...
  17. 4.6L Tech
    could anyone tell me where clutch cable is located exactly so i can adjust it, it is making a squeeking noise when i engage it thank you very much.:scratchchin
  18. 5.0L Talk
    I have a 1993 Reef Blue notch and I was wondering if there is any way to adjust the cable or quadrant. For some reason my clutch isn't disengaging enough to let me put the car in gear. When it goes in gear it's really tough. Please help
  19. 4.6L Tech
    So my throwout bearing is steal squealing it has got no better or no worse ive put 3 new throwout bearing in it within the past 2 years they all squeal but when you put just any pressure at all on the clutch it stops....Ive been told to get the firewall adjuster and that it would stop it...would...
  20. 4.6L Tech
    so here's what's going on with my car...Ive put a new clutch in my car and my throwout bearing has a terrible chirp ive replaced it 3 times with aftermarket and factory throwout bearing with the same result. But if i put the slightest bit of pressure on the pedal just the weight of my foot it...
Top