Ford Mustang Forum banner

clutch

  1. 5.0L Tech
    Hey everyone how's it going. I just recently had a new clutch, flywheel, pressure plate, steeda adjustable cable installed. I forgot to read the part that said in bold letters "USE AFTERMARKET QUADRANT" .The stock quadrant is still.on the car. So I go to pick up the car I'm.all excited start it...
  2. 2005-2010 Mustang GT Tech
    Mustang gurus I need some advice about clutch kit and flywheel for a 2007 Mustang GT. My stock flywheel needs to be replaced and I'm going to do the clutch at the same time, so what I need to know is what people would recommend for a clutch and flywheel, brand, model, etc. I plan to add some...
  3. 5.0L Tech
    ok im new to the mustang gang but have had plenty of toys and experience in the car scene. ok so now for the problem im having. 1. its a 1995 mustang gt with full roller 302 motor thats been converted to carb 2. it has a 5 speed borg warner trans with 3.8 bellhousing ok so for the problem i...
  4. 5.0L Tech
    I own a foxbody and my clutch isn't disengaging completely. I tore the quadrant apart and it's not broken. All the teeth are perfect and in fact there isn't even a groove wore into the plastic.The clutch cable is brand new (was installed just before winter) and looking at the throwout bearing...
  5. V6 Tech
    So the wife's 2000 v6 coupe started blowing hot air a week or so ago. Got around to troubleshooting today. Here's a rundown of what I have done. With the car on and running I am getting battery voltage to the compressor measured by unplugging the plug and sticking the two leads of the multimeter...
  6. V6 Tech
    i got a 99 mustang 3.8l 5 spd. me and my buddy just changed the clutch in it and now the pedal has no pressure. ive tried pulling it up and all that. jw what i should do
  7. 2011-2014 Mustang Talk
    Hi, I am new here, but no stranger to turning a wrench. I mostly work on my motorcycles, but I also work on my own cars. So I have an idea what this is, but I will not sway you with my opinion. I took the video while it was 30 degrees outside. it makes the noise most frequently when i first...
  8. V6 Tech
    i need to replace the clutch on my 1999 mustang 35th anniversary 3.8 liter v6 , ive seen a list on how to do it on here but i was hoping someone would post another list of tools i need and steps to ensure that the last list was correct. also ive never done it so i was wondering if im gonna have...
  9. Introductions
    i need to replace the clutch on my 1999 mustang 35th anniversary 3.8 liter v6 , ive seen a list on how to do it on here but i was hoping someone would post another list of tools i need and steps to ensure that the last list was correct. also ive never done it so i was wondering if im gonna have...
  10. 4.6L Tech
    Hey guys, So, today my Mustang started making a weird noise at the clutch, and I can't figure it out (link to video below). I just installed a new Exedy prostreet kit from American Muscle, complete with new throw out bearing and pilot bearing, along with pressure plate assembly and new billet...
  11. 4.6L Tech
    Hello forum! I have a 96 5speed GT. I bought the car a couple months ago, and have drivin' it off and on (weather permitting) Anyway, the clutch feels 'Really' heavy, pushing on it, i need a lot of force, and when holding it in my leg starts to shake from the weight. It has a new clutch...
  12. 4.6L Tech
    Hi: I need some advise. I just had my tranny rebuilt in my 2000 Gt. The clutch is new with less than 1000 miles on it. When I am driving at certain RPM the pedal shakes enough to make noise. If I press it down at all it stops. It does not happen when accelerating or slowing down, just at steady...
  13. V6 Tech
    I have a 2001 v6 and last spring I blew the clutch out. I replaced the clutch myself (first time). I noticed that after i replaced my clutch a couple things happened. When car is idling with clutch not pressed in I get a squeak. (throwout bearing). However I also noticed that when getting on the...
  14. V6 Tech
    Please help... We just installed a new clutch and pressure plate on my son's 2000 3.8 yesterday. It ran great until this afternoon. Now, today (only a day later) when you depress the clutch to start the car, the pedal stays on the floor for about 15 seconds before returning to normal. When the...
  15. 2.3L Tech
    Hello everyone. I just bought my first car and it happens to be a 1993 Mustang LX 2.3L 5spd. I really wanted the v8 but couldn't afford it. I have some issues that maybe I can get some help because I don't have too much money and I would like to learn how to fix my own car. The car has a high...
  16. 4.6L Tech
    I have a 5 speed 96 GT and while pulling away it quite often shudders quite badly and knocks and drops the revs to almost stall. I have taken it to a mechanic and he thinks it could be either the rear suspension, possibly the anti tramp shocks. Or it could be the clutch needing replacing...
  17. 5.0L Talk
    It's time for a new clutch. The original one has 140,000 miles on it and is slipping so bad I parked the car til I get get a new one this month. The only thing is which one do I choose. It's all stock except New headers and exhaust . i dont exactly drive like a grandma either.I've been looking a...
  18. 4.6L Tech
    Mustang Squeaking Clutch - YouTube Above is the link to a youtube video in which you can hear first hand what my mustang's clutch is doing. If you can't see the video for whatever reason, my Mustang's clutch squeaks very loudly whenever I press, and let go of the clutch, regardless if the car...
  19. 4.6L Tech
    Hello everyone. I'm having a clutch issue that I've been trying to sort out for the past couple of weeks now. In order to fully understand the problem, I'll provide the story of what happened. Last month, I went up to Reno to pick up my mustang. It was originally my step-dad's car, but he gave...
  20. SVT Cobra Tech
    I've heard a few bad things about aluminum flywheels and I personally trust a steel flywheel to be more reliable and live longer but I wanted something lighter than the stock steel one. Found this lightweight steel flywheel made by Exedy and am really thinking about it. Exedy Lightweight Racing...
Top