Hi I orderd the comp cams stage 3 xe270ah but I read some comments and turns out the stock bolts dosent fit the cams from the 2000 mustang gt 4.6 pi head camshaft bolts. Comp Cams Stage 3 Xtreme Energy XE270AH Camshafts 102600 (96-04 GT) - Free Shipping - AmericanMuscle Anyone knows the part...

Hey all, I was wondering if I could get any insight on a realistic gain from a new cam in a 351w. The engine has a performer intake and 600cfm carb. I have been looking at either the XE250H or the XE262H. The car is a weekend driver and never sees track time, only street. Thanks, Adam

I just had the Comp Cams STAGE 3 XFI SPR, XE272PH-12 (127600) installed in my mustang. Along with the cams I did the beehive springs and titanium retainers. I also had the heads P & P and installed CMDP. Then had it tuned on the dyno. First thing, the car sounds awesome. Sounds like a push rod...

It's that time! We've gotten literally hundreds of inquiries about the 2011 & 2012 5.0L Coyote Mustang cams. The wait is finally over! They're in-stock and shipping. Can't wait to bolt these up to our 2011 Automatic to see what it'll do to our current 10.43 @ 130mph. We'll have dyno results...

Ive tried searching around to see if they have developed stage 1, or stage 2 comp cams for the 4.0 but have had no luck? has anyone seen anything on the topic, or has noone ever made them......comp cams on a v6 would make it sound great with a good exhaust set up...:worship

I am new to all this mustang stuff but i am learning alot of new things. First off getting stage 2 comp cams gets you better performance then stage 1 right? and hp? And also if i wanted to get stage 2 what else would i need to get so my internals dont mess up... Thanks for helping me out!

will i need to worry about valve clearance if install xe278ah comp cams in a set of pi heads on my 97 gt because im doin a 5.0 stroker kit in it

ok after what seems like an eternity not being able to drive my stang i think im gonna do a forged 5.0 stroker on my 97 gt along with a set of heads off the 99-04s, xe278 comp cams and prffesional products intake plenum and tb now my question is will i need to worry about piston clearance...

not sure which cams to get. it's a daily driver so should i get the stage 1 from comp cams? for stage 2 i would have to get a stall converter, im not too familiar with them but im not shure i want to be cruising the streets over 2000rpm. i drive it about 40 miles a day and although gas is about...