Ford Mustang Forum banner

control arm

  1. 2014 GT LCA install and jack points

    2011 - 2014 Mustang GT Tech
    Hi all, I'm going to be installing some BMR LCA this weekend and I'm just wondering how you guys get the rear up? I see a lot of people stressing NOT to lift using the Diff. This is my first time lifting a vehicle and I'm just wondering what the proper way would be? Can I use a floor jack to...
  2. 2012 mustang, latest warranty fun.

    2011-2014 Mustang Talk
    First off let me being by stating that I'm not really here to ask any questions. I'm mostly here to just complain about the problems I've had with my car. I've had a couple of problems with my 2012 mustang and the most recent trip to the dealership for warranty service has left me a bit pissed...
  3. 1998 Mustang - Need help combining suspension jobs efficiently

    V6 Tech
    I took my 1998 Mustang to the shop due to a leaking manifold gasket, and while there the mechanics gave me a laundry list of undercarriage issues to deal with. I just spent a bunch of money on the engine, so I thought it best to decline the other jobs and just do the work myself. I am a...
  4. 2004 GT Control Arm & K Member Damage Help

    4.6L Tech
    Hey all - I need your help. I have damage to the k member, Front Lower control arm and suspension parts on the front driver's side. I have replacement oem stock control arms, sway bar brackets & bushings and I can pick up a 1999 k member for $100 on craigslist. Today, I tried replacing my Front...
  5. Do i need a quad shock for my 98 V6?

    V6 Tech
    Okay so ive been looking to upgrade my whole suspension because its got almost 150,000 miles on it and most of it is stock. Ive been pricing everything and i came across quad shocks on american muscle. So my question is if im upgrading all my shocks, struts, springs, and control arms, do i...
  6. URGENT: Steering Wheel Shake at 45mph+

    2005-2010 V6 Mustang Tech
    09 Mustang, 34k miles - Just as my warranty expires (3yrs up).... things start breaking. When I drive 45+ mph my steering wheel shakes somewhat violently, but somehow it is drive-able. Pep Boys installed ceramic pads on the front yesterday and looked into the problem and said the "control arm...
  7. 1998 Mustang Curb Crash

    4.6L Tech
    HELP!!! My two front tires had popped.So I crashed onto a parked car and hit the curb, I hit it so hard my passenger side rim got dented, my front passenger fender got dented from the other car, my front bumper got bent about an inch or two down, my inner tie rod is bent however my outer tie...
  8. pass side a-arm help

    5.0L Tech
    ok this is the problem my pass side tire is 1.5'' further back than the drivers side, the body kit was cut so the tire would fit, the only thing i can come up with is there is a drivers side arm on the pass side.? can that be? the frame is not bent at all(first thing i looked at) i need to...
  9. 2011 Mustang V6 Suspension Performance Parts

    2011 - 2014 V6 Mustang Tech
    I've made a few forum searches but I'm not hitting the info I need based on key word searches. Concerning the reduction and possible elimination of wheel hop, are the following aftermarket items any good at all, compared to stock: - Upper and Lower control arms Control Arms : Lethal...
  10. 97 squeaky front suspension

    V6 Tech
    My '97 seems to have developed a squeaky left front suspension when going over any bumpy surface or when turning the wheel left or right. The sounds seems to be coming from the ball joint / control arm area, however when I jacked up the front end I couldn't force any lateral or up/down wheel...
  11. 2000 GT suspension question

    4.6L Tech
    I am getting J&m Lower control arms and might get eibach lowering springs. Do i need a camber Kit?