Ford Mustang Forum banner

door

  1. Battery Dead and no Access to Car

    2005-2010 V6 Mustang Tech
    Hello dear Mustang Community I'm facing a serious simple problem. I need to access the dead battery, but am not able to enter the car for releasing the hood latch. Obviously my keys won't open the doors remotely, since the car has run out of power. So I tried to open the drivers door manually...
  2. 2011 Stock Left Speaker Plug

    Audio, Video, Navigation & Alarms
    Hey all. Started hearing my left speaker (6x8 Kicker) go in and out and crackle recently. Opened up the door and couldn't find anything wrong with the speaker itself, but when I wiggled the connector (the stock plug that you plug an adapter into to use an aftermarket speaker with the terminals)...
  3. Passenger Door Lock

    2005-2010 V6 Mustang Tech
    Hello first post here. I have an issue with the passenger door lock on my 2005 v6. It just seems to vibrate when I try to lock and unlock it and it makes a lot of noise. Usually it locks, but sometimes it takes a few tries to get it to lock or I have to manually push it down. Has anyone else had...
  4. V6 Door panel

    V6 Tech
    Hey everybody! I'm new here but I got a quick question that I can't seem to get an answer to, does the v6 Door panel interchange with the GT or Cobra door panel? Mine has a big gash down it and I'm looking to change it but I can't find any and I'm also looking to get it in black or at least...
  5. Plastic door panel?

    2005-2010 Mustang Talk
    I'm sure I've seen somewhere a plastic door panel for the 05 Mustangs but I've been looking online and can't see them anywhere. Did I imagine it? Like most people my doors started to peel in the heat way back at the start of spring and I'm so bad at crafty things that I have yet to get around to...
  6. 98 mustang driver door won't close

    4.6L Talk
    I have a 98 ford mustang and when i close my door the driver window leaves a gap. i can close by pushing the window and it closes but when i get in i have to roll the window down then up to get it to close. i took the door apart and everything seems tight but when it rolls up it seems to be loose
  7. 1968 Ford Mustang Questions

    Classic Tech
    I just have a few miscellaneous questions about my car and how to fix them. Here's the run down of my stang, 1968 Coupe with a 302 2V. Stock rear end and a 3 speed transmission. Question #1: I have a 3 speed transmission and I was driving it after getting it road worthy and noticed that I could...
  8. Folding down rear seats from trunk?

    Mustang S197 Off Topic Lounge
    For some reason, my drivers side door is not working. I have the 2005 model. I lost my remote fob and was to cheap to replace it. I have the key and can access the trunk, i was hoping that there is a way to push down the rear seats from the trunk and crawl through. Any advice, my car is blocking...
  9. Question about 1972 Mustang door latch

    Classic Tech
    Hey everybody, So is it conceivable that I could replace my driver side handle and door latch on a 72 coupe? I can find the parts. Im assuming there is also an internal spring for the mechanism as well would that come with either of those two pieces? Or would it likely need to be purchased...
  10. 1968 Mustang unknown parts.

    Classic Tech
    Hi everyone, This is my first post here in allformustang.com. I'm from France and I just bought a 1968 Mustang GT390. I am currently in the process of restoring/fixing this beauty. So that's why I'm asking for your help/advice about some parts that I don't understand. - I have a round plastic...
  11. v6 mustang 2006 door handle loose/not retracting all the way

    2005-2010 V6 Mustang Tech
    Hey guys I'm new here and this is my first thread i hope in doing it right. Anyway i was wondering if anybody could help me with a small problem I'm having. My door handles work fine but when i open the door on either side the handle doesn't get in all the way without me pushing it. There is...
  12. Help finding a particular fuse for LED interior install

    2005-2010 V6 Mustang Tech
    Hey fellow pony enthusiasts - I'm trying to install a pair of sweet sequenced white led strips onto the underside of my 2006 v6 passenger and driver side doors. To make the install easier for me, I picked up an "add-a-circuit" double fuse holder to plug the wiring into. I would like the lights...
  13. Vinyl door peeling off help!!

    4.6L Talk
    Hi the vinyl on my door is peeling off it have a air bubble in the arm rest, how can i fix it?:S here are a pic from the internet Also the lower plastic part sound too much somebody know how can i tighten up i know its attached with plastic.
  14. Anybody have experience with RedLine Goods?

    4.6L Talk
    They sell leather products for lots of cars including our mustangs, including door skins and inserts and armrest covers. The demo install pictures they have look pretty mediocre at best, but I know that anything that has to be custom installed wildly depends on the person installing, and the...
  15. Have to Pull Door Handle Twice to Open. 2013 V6 Mustang —*Normal?

    2011-2014 Mustang Talk
    Hey Everyone, I have a relatively new Race Red mustang V6 (less than 2,000 miles on it) mustang. After unlocking the car, (the door latches go up as they should), I have to pull the door handle once, door stays closed, then a second time and the door will open. Kinda like an anti theft thing...
  16. 2011 Mustang GT Doors "loose"

    2011 - 2014 Mustang GT Tech
    My 2011 GT doors shake when I go over bump and especially when I corner hard. After mentioning this in a another post I looked to see if anyone else had this problem and didn't find much. A lot of door trim rattles but nothing like what I'm dealing with. The doors actually move inward and...
  17. Replacement Shaker500 Door Woofers

    Audio, Video, Navigation & Alarms
    I'm searching for an adequate replacement for the Shaker500 door woofer. The replacement must meet certain criteria. 1. Fits in the existing enclosure. 2. The existing grill must be used, with NO protrusion or expansion rings. 3. Resistance must be 2 ohms. (Or 4 Ohms but DVC) 4. I can...
  18. 2006 Mustang Doors keep unlocking by themselves

    2005-2010 V6 Mustang Tech
    About a week ago my battery died so I charged it, but since then my door locks have somestimes not worked with the key fob. I try to lock them, but the door just makes a noise with no locking. I then try it manually with the key and it sits for about2 seconds then unlocks itself. I have even...
  19. 2006 Mustang Door Subs not working

    Audio, Video, Navigation & Alarms
    Hello everyone. I am new to the forum, just got my first mustang, 2006 GT 8 cylinder manual, and I am loving it haha. Man this thing has power with pretty much stock equipemtn. The old owner did put a suspension tires and a nice mufler....but ok on to my question. I was thinking about...
  20. '67 door latch spring and locking issue

    Classic Tech
    I took out my latch assembly today and i believe there is a spring missing. I circled the spot where I think it should go in the picture below. Is that the correct spot to put a spring and is there any more that I might be missing? The problem is that the latch doesn't actually latch onto...
Top