Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-38 of 40 Results
  1. V6 Tech
    The balancer on my 1998 mustang's DS has had the rubber rotted away and was just wandering around the drive shaft so i took it off my car. So now i need to replace this piece but I'm not sure how to go about doing so. Can i replace just the balancer? or do i need to replace a whole section or...
  2. 2011 - 2014 V6 Mustang Tech
    So after I placed an order for BMR's rear tunnel brace/driveshaft loop, I've discovered that it's actually meant for OEM two-piece driveshafts like the one in the GT (thanks Robert, from Shaftmasters). When equipped with an aftermarket one-piece drive shaft, there also may be an issue if you...
  3. 2011 - 2014 V6 Mustang Tech
    I ran across an article stating the Driveshaft in the V6 fails at high speed's. I wanted to get some H-Rated tires and the BAMA tune so I can open it up at the track. So are these Driveshafts weak or was the person driving this car stupid or both? Here is the link: Watch what happens when a Ford...
  4. 2011-2014 Mustang Talk
    Watch what happens when a Ford Mustang driveshaft fails at 135 mph: Watch what happens when a Ford Mustang driveshaft fails at 135 mph "Before we get started, we feel the need to repeat the standard issue warning about automotive stupidity: Do not try what's shown in the video after the jump...
  5. 5.0L Tech
    Okay I have worked on alot of jeeps and never seen one of these makes me feel like a moron. I thot it was my diff that was leaking but its comeing from the center of this. How do I stop it? the reason I noticed is the bolts to the driveshaft came loose. I put them back on as tight as I could.
  6. 2005-2010 Mustang GT Tech
    Hey guys, I'm having a small problem with my driveshaft... Its clunking all over, I'm thinking the tranny is a bit tilted (as some of you know, my car was imported wrecked and I restored it here...) Can anyone take some under the car shots for me, just to see how straight the tranny goes vs the...
  7. Classic Talk
    When I bought my '67 coupe almost 2 years ago it had recently undergone an automatic to t5 swap. The old drive shaft came with the car and I am looking to offload it for some cash in order to help fund a rack and pinion swap. Whats a fair price to sell it for? I tried looking around online but...
  8. 4.6L Tech
    I have a few problems and am not sure if two of them are related. I purchased a 2002 GT 5-Speed with 113k and I hear two noises. One, I'm almost positive is a throwout bearing. I hear the noise and it sounds like a fast chirping. Usually, enganging the clutch or releasing it all the way will...
  9. 2011 - 2014 Mustang GT Tech
    I am looking to swap my driveshaft from the stock to a Shaftmaster's 3.5 in driveshaft that they say is a direct bolt in. I was going to do a pulley swap but didn't want to risk throwing rods and such so I will do this instead and other smaller necessary things. Anyway, I have been reading up...
  10. 2005-2010 V6 Mustang Tech
    Sooooooo here is the riddle, earlier this year I had a new clutch and aluminum flywheel installed in my car. After that my car would vibrate ALOT at about 100mph. later I changed my gears from 3.32 to 3.73 this brought the vibration down from 100mph to 80mph. This made me sure that the issue...
  11. 4.6L Tech
    i have an 02 gt and im getting this real bad vibration when going at highway speeds, anything over 70mph starts the vibration. my steering wheel starts to shake and it feels like its coming from the front end of the car.. i was told to check the u joints but i was wondering if maybe a simple...
  12. 5.0L Tech
    Does anyone know if there is a part number on the ford motorsport aluminum driveshaft M-4602-G that is located or stamped on the driveshaft itself? I am trying to buy one from a yard and want to make sure it is the 4602-G and not J! Thanks!:bigthumbsup
  13. V6 Talk
    more importantly, will an aluminum drive shaft fit my 99-04 v6 auto? i was looking at one here Ford Racing Aluminum Driveshaft
  14. Classic Tech
    first post ever so here goes nothing.. i recently bought a 1968 mustang which has a 5.0 engine from a 91 mustang and a T5 tranny.. i have lying around Tokico shocks & struts from my dads car which was a 96 mustang and was wondering if they would fit. they are posted right now on craigslist...
  15. 5.0L Tech
    Hey, im trying to diagnose some issues with my car, i have the stock driveshaft for the T5 but i also have a driveshaft for a AOD. Can i put in the AOD driveshaft with the T5? :headscratch:
  16. 4.6L Tech
    I have a 5 speed gt, and when im shifting from first to second and sometimes 3rd i get slop in the drive shaft. Is this common on mustangs? Also really quick, would anyone know why i have a little fluid on axle housing but only on the right side.
  17. 2005-2010 V6 Mustang Tech
    I want to get a T-Lock, but do I also ABSOLUTELY NEED to install 4.10's or 3.73 gears along with it? Please help me out! Thanks!
  18. 2005-2010 V6 Mustang Tech
    Hey guys.. I'm thinking of getting one of the new 4" aluminum driveshafts from Coast Driveline and Gears for my 2005, 4.0. It goes for about $525 + Shipping. Does anyone have any comments (good/bad) about this driveshaft / manufacturer? Should I get it, or is do you guys lean toward another...
21-38 of 40 Results