Ford Mustang Forum banner


  1. 2005 GT 4.6 rattling/knocking noise when turning/accelerating

    2005-2010 Mustang GT Tech
    Hi community, I finally decided to open up a new thread to make use of everybody's knowledge, advise and experiences. I already read trough Dingo7222's thread which sounded exactly like the problem I have with my car. But, I checked the motor mounts and especially the spacing of the steering...
  2. Patent Reveals Ford Wants to Make its Engines Levitate

    No, for real. Ford is developing active engine mounts that are magnetic to better isolate the engine’s vibrations from the chassis. Some high end automakers already use magnetorheological dampers to similar ends. These, though, work like a car’s suspension, using magnets to stiffen or soften a...
  3. 85 GT Vibration issue

    5.0L Tech
    Gonna try my best to describe what's going on. There is nothing noticeable until I reach any speed over 50 MPH. Once I'm over 50 there's a vibration coming from the drive train. If I push the clutch in it's even more pronounced. If I put the car in neutral it's even MORE pronounced. As soon...
  4. 1969 mustang coupe complete suspension/drivetrain swap?

    Classic Tech
    hi, first time poster here. i recently picked up a 69 mustang coupe with a inline 6 and automatic transmission. i plan on putting a fuel injected modern motor in it but would really like to upgrade the suspension as well. i know you can buy kits online so please dont try and sell me on that...
  5. 1995 Mustang GT loud knocking sound Please help!

    5.0L Tech
    I have a 1995 5.0 H.O. V8 Mustang GT 5 Speed with only 90,000 miles that seems pretty much stock except apparently it had a lot of suspension work done to it so that it could take turns better and was also lowered about an Inch and a half, anyways..The PROBLEM is that it makes a loud knocking...
  6. 2000 Mustang GT Whining While Turning in Reverse. Cause?

    4.6L Tech
    I recently bought a 2000 Mustang GT, V8 - 4.6L with only 90,000 original miles. The previous owner babied it very well. Now, three weeks after purchasing it, I am hearing a whining-like noise when I'm in reverse. It happens as I turn before, during, and after applying the brakes. It doesn't...
  7. 2005 Mustang V6 fuse box help

    2005-2010 V6 Mustang Tech
    Water ended up in my panel fuse box (by the passanger's feet). When i turned the car on, no electrical worked (e.g. brake/headlights, domelights, radio, etc.) and I couldnt shift out of park. I figured out that the main fuse (the long one above all the little 5/10A) was the problem. Couldnt...
  8. 2007 Mustang 4.0 - Differential

    2005-2010 V6 Mustang Tech
    I'm new to the site and figured it would be a great place to start looking for advice on drivetrain options for my 2007 Mustang 4.0. As I understand it, Mustangs in 2007 came stock from the factory with a 28 spline 7.5in Rear-end with a set of 3.31:1's? I did some digging around and can confirm...
  9. 1966 Mustang I6 - 4-Speed Manual Shift Linkage Adjustments

    Classic Tech
    I am currently rebuilding my drivetrain and am at the point where I need to adjust my shift linkages on my 4-Speed and would appreciate any advice or help. Thanks, Nathanael
  10. Drivetrain Shudder

    2011 - 2014 Mustang GT Tech
    To start off, my car is a 2011 GT with a manual transmission. Build date is August 2010, and it only has about 2950 miles. Just a couple days ago I started experiencing a slight drivetrain shudder on take-offs. It feels like driving slowly over a rumble strip, and the vibrations seem to be...
  11. What available tuners to disable PATS / TPMS feature

    2011 - 2014 V6 Mustang Tech
    I'm trying to research using a 2011 v6 drivetrain in a "New Edge" body. I'm not interested in using the '11 gauge cluster, probably some Auto Meter stuff. I read somewhere that the 99 - 04 cluster tied into the PATS stuff, and I figure the new Mustang does as well. Are there any tuners...
  12. loud scraping noise under my 1994 Mustang v6 3.8l

    V6 Talk
    My mustang is making a loud scraping noise under the middle of my car, has new brakes and shocks. It sounds like metal on metal. :mesad::mesad:It makes the noise whenever I push down on the gas, especially when there is more weight in the car, or I go over a bump. Any ideas on what is causing...
  13. 5.0 mustang drivetrain loss percentage %

    5.0L Tech
    Hey does anyone know the drivetrain loss percentage for a 5.0 mustang T5 from what I know I'm assuming 17-20 %
  14. 2005 V6 performance upgrades. Advice and Comments please =)

    2005-2010 V6 Mustang Tech
    I'm not very smart when it comes to engines, sound systems are more my specialty and I just got a 2005 V6 Mustang and I want it to run like a beast! I would like to know if all the following equipment will fit my car and if they will run together in harmony. Please give your two sense :)...
  15. 1985-1985 Mustang clutch diameter -- is the extra half-inch worth it?

    5.0L Tech
    This is mostly for my curiosity, and academically I think I understand, but if someone knows what effect there is from the change of a 10-inch diameter to 10.5-inch diameter on the clutch, that was made between the 1985 and 1986 model years? My '83 obviously has the 10-inch stock, but is it...
  16. 1998 GT: vibrates when letting off gas pedal and slowing down

    4.6L Tech
    There are around 110k miles on my 1998 GT. Whenever I let off the gas pedal there is a vibration primarily felt in the floor of the vehicle and my seat. If I add gas again I can 'rev' my way out of the vibration; although it doesnt disappear altogether as soon as I add gas. It is more pronounced...
  17. Metal or Rocks in the RWD

    V6 Tech
    okay so I went by a auto shop and they told me there was metal in the RWD. It sounds really bad when your driving down the road from the back of the car like somethings dry back there?!? Can anyone tell me what that means. He said it sounds like rocks in the back, I dunno what that means. 2000...