Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 5.0L Tech
    Ok here we go. I had no operational temp gauge on my 94 GT. I replaced the temp sending unit which fixed that issue, now I have a new one. It's overheating, BAD. The fan isn't even kicking on. I have a new ECT sensor which I think may help, but I don't know for sure. I also have a new...
  2. 5.0L Tech
    1991 5.0 Lx convertible . KOEO codes im getting are 22, 85, 51. I know that 22 is the BAP(map), but i need help testing it to see if its the wiring or the sensor. 51 , ECT sensor has open circuit. When i look at the ect sensor it only have two wires going into it which none are a ground. Please...
  3. 5.0L Talk
    I'm not sure if this is the right spot for this, so if its not can someone move it for me? I've just recently finished my pro tools courses {music} and now i'd like to go to some sort of tech school. Does anyone know of any good schools in GA? Like wyotech, UTI, ect? thanks
  4. Introduce Yourself | No Tech Questions Please!
    It is giving me a real hard time. When its cool out or at night it runs like a dream but when it gets hot out its runs for a short while sputters then stals. I let it sit for all of 5 seconds and its back and running. Im leaning towards it being an Engine Coolant Tempature sensor (ECT) or an Air...
  5. 4.6L Tech
    A few days ago I started having problems getting the engine to stay started and idle when cold. Checked out the ECT sensor and found it was reading about 250 ohms when cold (when it should have been around 30-40k Ohm if I read correctly). Also found that rather than 4 volts on the yellow-green...
1-5 of 5 Results